How do I wire an Ooga horn with a switch?

Home / the12volt's Install Bay / Car Security and Convenience / How do I wire an Ooga horn with a switch?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nidish

Member - Posts: 29

Joined: August 01, 2015

Location: Neutral Zone

Posted: September 27, 2016 at 9:40 AM / IP Logged

Hey guys, so I recently bought an ooga horn off ebay. I've found a place to mount it in the engine bay. on the back of the horn, it has gove + and - termninals.

I want to install it in my car, with a switch mounted somewhere in the dashboard. How would I safely wire it? I have a 2004 Mitsubishi Lancer.

Thanks

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 27, 2016 at 1:16 PM / IP Logged

Easier to relay it otherwise heavy cable required and the switch may not have the capacity.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.