Alarm install for 2010 Ram 1500

Hello everyone, I would like to install this alarm/keyless to a 2010 Ram 1500 Automatic. I have installed many alarms before with imported cars. I wonder if with this car, do I need to buy anything extra ? See, I don't have this in my toolbox: ADS-RNG-GM3 iDatalink OEM Integration Can Bus Module Here is the parts I have: picture upload sites

Resistors for hardwire of door lock control 1/4 watt 330ohm, 100ohm and for (-)parking lights 1000ohm. Otherwise if you have the factory alarm use a DLPK convenience bypass interface module to do the door lock control and alarm control. As OEM alarm requires either OEM FOB or Transponder key in cylinder with ignition to dis-arm. The DLPK does: Core Functions •Door Entry Monitoring •Door Lock / Unlock Control •Factory Security Control •Hood / Trunk Pin Entry Monitoring •Tach / RPM Output Detailed Function List W2W DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock RS-RAP Shut Down (Retained ACC Power) RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Hood Pin D2D DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock RS-RAP Shut Down (Retained ACC Power) RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Driver Door Pin SS-Entry Monitoring Hood Pin

Thank you. I have 2 related questions 1) Is there a wire to cut to completely forget about the Factory alarm ? Owner didn't tell me if car has Fact alarm. Result: My Alarm/Keyless replaces the Fact alarm. 2) Can I use this ? http://www./itm/Directed-29402-Dem-Universal-Alarm-Bypass-Module-Very-Good-/400996097451?hash=item5d5d3addab:g:6AEAAOSwHxVW7A3x&vxp=mtr 3) In case the car has no Fact Alarm (likely), are these 3 resistors really necessary ? "Resistors for hardwire of door lock control 1/4 watt 330ohm, 100ohm and for (-)parking lights 1000ohm" I have installed a few Third Party Alarm/Keyless and never did I need to order resistors. That the job of the alarm controller.

Sorry for the missing link: Please Remove ** www.e**b**a**y.c**o**m/itm/Directed-29402-Dem-Universal-Alarm-Bypass-Module-Very-Good-/400996097451?hash=item5d5d3addab:g:6AEAAOSwHxVW7A3x&vxp=mtr

1)No as the Programming wont allow it to be disabled without the TIPM being reflashed. 2)No it is on compatiable with a 2006 RAM. Manual for 20402 & 29402: http://www.readyremote.com/pdf/manuals/20402.pdf 3)MUX is part of vehicle and exists with or with out factory alarm. Only if you use a bypass will you not need the resistors with or with out a factory alarm.