2005 Chevy Colorado, Viper 5806V

Home / the12volt's Install Bay / Car Security and Convenience / 2005 Chevy Colorado, Viper 5806V

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dman007

Copper - Posts: 106

Joined: November 24, 2002

Location: Florida, United States

Posted: October 15, 2016 at 4:46 PM / IP Logged

Viper 5806v, installed into a 2005 Chevy Colorado. Using Fortin Evo-all Bypass module. System works as it should when disarmed. But while armed, the when activated the remote start sequence actually trips the ignition trigger on the alarm. Thus canceling the remote starter and triggering a full alarm. Could the viper unit be defective? I have never encountered this before.

DTS Performance

St Petersburg, FL

Back to Top

dman007

Copper - Posts: 106

Joined: November 24, 2002

Location: Florida, United States

Posted: October 17, 2016 at 4:07 PM / IP Logged

Got it all sorted out!

Turned out to be an issue with the unit.

DTS Performance

St Petersburg, FL

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.