Factory remote has delayed response W/ DBALL2

Home / the12volt's Install Bay / Car Security and Convenience / Factory remote has delayed response W/ DBALL2

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sam369

Member - Posts: 36

Joined: December 18, 2014

Location: California, United States

Posted: October 16, 2016 at 10:21 AM / IP Logged

Avital 5303 with DBALL2 in D2D mode were installed in my 2016 Altima 2.5 S. Most features work well. However, the factory remote became irresponsible within like 5 seconds after pressing a button. Is it an inevitable 'side effect', or is there a way to get rid of the lag?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.