2001 Ford F-150, viper 4105v

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Ford F-150, viper 4105v

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

big_mike82

Member - Posts: 2

Joined: November 29, 2016

Location: California, United States

Posted: November 29, 2016 at 7:26 PM / IP Logged

Hi I'm new to this page and I'm going to attempt to install my own remote start so any help would be appreciated. I bought a viper 4105v with a ALCA bypass, according to this diagram if I use the D2D cable it Should control door locks right? So all I need to wire up from the remote start would be the heavy gauge wires like

Red-12v

Pink/white- Second ignition

Red-12v

Orange-accessory

Purple- starter

Pink- primary ignition

And the D2D cable should control everything else? I also ordered the cable to flash the ALCA

Thanks in advance. 2001 Ford F-150, viper 4105v - Last Post -- posted image.

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: November 29, 2016 at 7:45 PM / IP Logged

It probably will not. The web site only shows it doing the Immobilizer Bypass.

Most of the older ford I have done, I have always had to hard wire most everything.

The ALCA might be a bit of overkill since it will probably only do the Bypass.

Link to Kreg357 F150 Install Pictorial:

https://www.the12volt.com/installbay/forum_posts.asp?tid=134275

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

big_mike82

Member - Posts: 2

Joined: November 29, 2016

Location: California, United States

Posted: November 29, 2016 at 9:36 PM / IP Logged

Thanks!! I should've done more research

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.