Viper 5305V and Flashlogic FLCAN

Hello I have a question. What is E-Brake status input and output? Does anyone know where is that wire on the Viper 5305V? Thanksdcd

Emergency/Parking Brake status....brake actuated, ground output. On the Auxiliary/Shutdown/Trigger harness (White 24 pin connector)...pin 13, BLACK/ white.

I would like to connect the wires here and please can somebody help me to check if all connections are correct? Customer only wants me to hook it up for REmote start only, no alarm needed. I will use Data Mode. Thank you members Remote Start, 10-pin Heavy Gauge to Car: 12 volts RED / black + Red+ RED / white to 12volt White in car (Dash fuse) Starter Green and Violet to White in car (ignition sw pin 2) <<<<??? Ignition 1 Pink to White in car (ignition sw pin 3) also to Pink on FLCAN. Ignition 2 Pink white or Pink black (?) to Pink in car <<<???? Accessory Orange to Red (ignition sw) Auxiliary/shutdown/trigger 24-pin Pin 10 Blue (-) trunk pin/instant trigger input to Yellow/red-Trunk status (-) output on FLCAN Pin 13 BLACK/ white (-) Parking brake input to Green E-brake status (-) output on FLCAN Flash Logic Flash Logic FLCAN connections: Will connect them as shown in diagram. However, I have a question on the Relay connection #85 will be to ground or to ORANGE in the RS system 5-pin connector of the Main Harness?dcd