AutoMate AM6 Horn Programming?

Home / the12volt's Install Bay / Car Security and Convenience / AutoMate AM6 Horn Programming?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jerryp2375

Member - Posts: 2

Joined: December 04, 2016

Location: Maryland, United States

Posted: December 04, 2016 at 5:47 PM / IP Logged

Hi all...Purchased a 2004 Lincoln Aviator with an AutoMate AM6 installed but no remote came with vehicle. Ordered a new remote & when I went to program it I came to find out that the valet/programming button was missing. Ordered & installed a new programming button & programmed the remote(s). All is working fine except I am not getting the audible horn confirmation when locking/unlocking. I know the horn is connected to the system as it honked while programming the remote. I've searched all over online & absolutely cannot find any instructions on how to program this feature. Could someone please tell me how I can program the horn to sound when locking/unlocking? Any help would be much appreciated!

I also have another question regarding a replacement remote for the remote start/keyless entry system in my 2004 Ford Expedition, but I cannot remember at the moment what unit is installed so I'll post as a seperate topic.

Thanks,

Jerry

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.