the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Power lock actuators, which brand?


Post ReplyPost New Topic
< Prev Topic Next Topic >
418sq 
Member - Posts: 2
Member spacespace
Joined: January 06, 2017
Posted: January 06, 2017 at 1:46 PM / IP Logged Link to Post Post Reply Quote 418sq
Greetings,
I used to install mainly DEI alarms but it's been several years. We mostly used two different types of door lock actuators. The standard looking ones and a green slightly more boxy DEI one.
Searching online I noticed there are tons of lock actuators for sale on Ebay etc. They mostly look exactly the same, with some priced around $4 each, but I have no clue if these are garbage with a high failure rate.
Does anyone have experience with some they purchased online, or any comments?
Also, decent alarm recommendation? Someone pretty simple, don't want to get carried away. I saw a couple of Avital units that look decent for around $40 or so.
Thanks
418sq 
Member - Posts: 2
Member spacespace
Joined: January 06, 2017
Posted: January 06, 2017 at 1:48 PM / IP Logged Link to Post Post Reply Quote 418sq
*Something
is there an edit post button?
i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 06, 2017 at 7:45 PM / IP Logged Link to Post Post Reply Quote i am an idiot
https://www.amazon.com/Spal-37000007-2-Wire-Actuator-Hardware/dp/B002IY3756
You will be able to edit your posts after you have made a few more posts.
lectricguy 
Copper - Posts: 359
Copper spacespace
Joined: March 18, 2008
Location: Rhode Island, United States
Posted: January 07, 2017 at 11:13 AM / IP Logged Link to Post Post Reply Quote lectricguy
I've used DEI for trunk pop/tailgate lock/door locks with alot of success, and no failures. I tend to stick with the DEI brand for the quality and reliability.
I did try another cheaper brand, I don't recall which one, on a truck tailgate lock. It failed after about 6 months and replaced it with a DEI. That was 7 years ago...still working today.
Lectric Guy

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer