2011 Kia Forte, command start

Home / the12volt's Install Bay / Car Security and Convenience / 2011 Kia Forte, command start

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

thefatpigeon

Member - Posts: 15

Joined: August 13, 2010

Posted: January 28, 2017 at 4:18 PM / IP Logged

Something is causeing my starter to stop cranking. it will only crank for a second and then cut out. I then get confirmation from the remote that the car is started.

Back to Top

thefatpigeon

Member - Posts: 15

Joined: August 13, 2010

Posted: January 28, 2017 at 7:46 PM / IP Logged

This has got to be a DBALL 2 issue. I attempted to reflash the DBALL. It will not learn my transponder. This is a canadian Kia. Also when The key is in the on position I have a car indicator with a key in it. This symbol means I have a transponder.

Back to Top

thefatpigeon

Member - Posts: 15

Joined: August 13, 2010

Posted: February 07, 2017 at 8:52 PM / IP Logged

Kia forte 2011.

DBALL 2 will not learn transponder key. car starts with key. will not start with remote starter.

follow the steps to learn the key. It flashes LED code for learning.( in instructructions it says will take 4-6 minutes) after a minute of this is stops and flashes code for "programmed succussfully no BYPASS"

I am having issues with the remote starter and I want to make sure its not the DBALL that is giving me the issues.

Regards

Back to Top

silvercivicsir

Copper - Posts: 402

Joined: November 21, 2003

Posted: February 08, 2017 at 4:14 PM / IP Logged

I had no luck using a DBALL for a Kia/Hyundia. Idatalink learned right away. I would suggest switching bypass modules and using a Idatalink.

Back to Top

Search for other posts by silvercivicsir

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.