2012 Toyota 4Runner Limited, alarm wiring

I looked and the only sensor shown doesn't look like FSS   http://mypushcart.mybigcommerce.com/dual-stage-shock-sensor-for-car-alarms/ It's ok. Maybe I should leave it the way it is :) Thanks again!

you dont want your alarm to ring whenever a big truck passes by anyway! Can still install the tilt sensor though. It might (hopefully not) prove itself worthy one day.

To be honest I looked at the Compustar DAS 2shock & tilt sensor but Fortin told me it is not going to work with Evo-All. What tilt sensor do you recommend and where does it get mounted ( cabin or engine compartment)?

Found DEI 507M tilt sensor. Here are the questions: 1-how do I connect it to Evo-All? I suspect I will use the same wire I used for the glass sensor [ A2/Purple = External Trigger (-) ] but wanted to make sure I just tap into the same wire 2- The 507M requires a "ground-when-armed" wire ( https://www.falcon.ro/files/home/01.Securitate_si_confort_auto/03.Module_optionale_securitate/Directed507M/Directed507M_manual_EN.pdf ) wondering what wire would that be on EvoAll? 3- Happen to have an URL for a PDF/JPG showing purpose for all Evo-One wires? In the tutorials I have they only show the ones you need and you don't even have the option to look at a complete diagram. Thanks!

Found answer one of the questions: 1-? 2-The white starter kill output would be the ground-when-armed output you need. 3-? 4- I need a true 2-way RF kit so I know when the alarm was triggered. That's the only reason I got the 2-way RF kit for Evo-All. Just learned that none of the Fortin kits does this. Do you know a RF kit that will work with Fortin Evo-All? Thanks!