the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 4706 wiring 2001 silverado?


Post ReplyPost New Topic
< Prev Topic Next Topic >
lime4x4 
Member - Posts: 26
Member spacespace
Joined: March 25, 2012
Location: Pennsylvania, United States
Posted: April 04, 2017 at 9:19 AM / IP Logged Link to Post Post Reply Quote lime4x4
Will be installing a viper 4706 remote start on a 2001 silverado with a diesel engine. Does anyone by chance have a wiring diagram as to what wires from the viper go where on the vehicle? Esp the 8 pin connector
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 04, 2017 at 9:46 PM / IP Logged Link to Post Post Reply Quote kreg357
Should be covered in this Pictorial :
https://www.the12volt.com/installbay/forum_posts.asp?tid=135786
Soldering is fun!
lime4x4 
Member - Posts: 26
Member spacespace
Joined: March 25, 2012
Location: Pennsylvania, United States
Posted: April 18, 2017 at 7:15 PM / IP Logged Link to Post Post Reply Quote lime4x4
I got everything hooked up. Can the pink/black wire from the viper main 8 pin harness be used to power the brown accessory wire?
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 19, 2017 at 6:33 PM / IP Logged Link to Post Post Reply Quote kreg357
No. If you wish to power the Brown ACC2 wire you will need a 30/40 Amp SPDT relay with harness and inline fuse. You will use the Vipers thin Orange (-) Accessory Output wire to control the relay. I believe the relay wiring is also mentioned in the Pictorial.
Soldering is fun!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer