the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Avital 4103, doors unlock no remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
djtonyc77 
Member - Posts: 2
Member spacespace
Joined: April 24, 2017
Location: Illinois, United States
Posted: April 24, 2017 at 8:32 PM / IP Logged Link to Post Post Reply Quote djtonyc77
I have installed an Avital 4103 connected by D2D using a DBALL2 bypass on my 2014 Toyota Corolla H Key. I have flashed the DBALL2 properly.   I am assuming my canbus connections are good I am able to lock and unlock my door with the remote. I am not getting any response with the remote starter portion. I have the the 2 heavy gauge red cables going to 12 volt constant from the battery, the pink is going to ignition 1 on the car harness, pink/white to ignition 2, and purple to the starter. The odd thing is that the cables from the remote starter are heavy gauge and on the ignition harness they are very small). I am getting voltage to the remote start module. I dont know if I am missing a step. First foray with remote starts, thanks for any advise
djtonyc77 
Member - Posts: 2
Member spacespace
Joined: April 24, 2017
Location: Illinois, United States
Posted: April 24, 2017 at 11:14 PM / IP Logged Link to Post Post Reply Quote djtonyc77
Nevermind, didnt see the safety switch I had to wire up. Works like a charm. derrr

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer