the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Clifford 330x1 Additional Sensors


Post ReplyPost New Topic
< Prev Topic Next Topic >
ridgeee 
Member - Posts: 1
Member spacespace
Joined: May 11, 2017
Location: United Kingdom
Posted: May 11, 2017 at 7:23 AM / IP Logged Link to Post Post Reply Quote ridgeee
Hi,
I'm in the UK and have a vehicle with a Clifford 330x1 installed. Now I'm looking to disable (simply unplug) the installed clifford ultrasonics and use this sensors port for the following additional senors: 508D Proximity, 504D Shock/Impact and 506T Glass Break.
Now I need to know if I can run the above daisy chained together from this port (I'm new to all this alarm stuff but understand that the port is mux/zone 4) and if so what the wiring setup would be and if any blocking diodes would be needed.
Thanks in advance.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer