Viper 4105V Programming Issue

Home / the12volt's Install Bay / Car Security and Convenience / Viper 4105V Programming Issue

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

truongrnguyen

Member - Posts: 1

Joined: June 19, 2017

Location: Georgia, United States

Posted: June 28, 2017 at 7:20 PM / IP Logged

Hey everyone, after peeking around this forum, I was finally able to install the Viper 4105V into my basic 2001 Toyota Tacoma. But here is the issue at hand. I want to edit some of the options and I'm doing this exactly.

1. Turn ignition on then off

2. Take key out of ignition (also kept key in ignition another time)

3. Held Valet Button on unit

(Heard horn once and released. Wanted Menu 1)

4. Clicked the valet button twice for feature 2

5. Pressed and held valet for confirmation (Horn chirped 2 times)

6. Clicked lock on remote for Option 1 (nothing happens)

7. Long horn sound and programming times out.

Is my unit locked by a bitwriter?

Back to Top

catback

Silver - Posts: 703

Joined: August 13, 2002

Location: Canada

Posted: June 29, 2017 at 12:45 AM / IP Logged

Is a remote programmed to the system? If not, that must be done first.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.