viper 4706 install, 2005 gmc 2500hd

Home / the12volt's Install Bay / Car Security and Convenience / viper 4706 install, 2005 gmc 2500hd

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

signalstan

Member - Posts: 1

Joined: July 06, 2017

Location: California, United States

Posted: July 09, 2017 at 12:18 PM / IP Logged

hey folks I could use some help I am replacing an old avital remote start/alarm with a new viper 4706v system the avital was working. I hooked up all the wires except one for the neutral safety switch I could not find a wire for this on the viper system the alarm works now it locks and unlocks the doors flashes the lights but wont start the truck (2005 gmc 2500hd) I dont know if the wire is the issue or the unit needs to be programed with a bit writer

Back to Top

og2tone

Member - Posts: 1

Joined: July 09, 2017

Location: Oregon, United States

Posted: July 09, 2017 at 3:27 PM / IP Logged

neutral wire must be grounded if the vehicle is an automatic transmission. The brain must be set to automatic transmission.

john olivares

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.