Clifford concept 470 going off

Home / the12volt's Install Bay / Car Security and Convenience / Clifford concept 470 going off

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

scoobynick

Member - Posts: 8

Joined: June 15, 2017

Location: United Kingdom

Posted: July 18, 2017 at 4:23 PM / IP Logged

Hi all I need some help please I've just fitted a Clifford concept 470 alarm to my ford focus 2001 which has a standard ford alarm fitted now the Clifford all works fine locks doors indicators flash etc now about an hour or so later the Clifford goes of reading the last trigger it says interior light trigger now the lamp was not illuminated when it went of I've checked all doors pin switches all OK I've fitted diodes for the door trigger at interior light that is were my door connection is any help would be great

Back to Top

scoobynick

Member - Posts: 8

Joined: June 15, 2017

Location: United Kingdom

Posted: July 21, 2017 at 7:23 AM / IP Logged

Does anyone know if the standard ford alarm does anything like a self check

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.