2002 Audi A4 security wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2002 Audi A4 security wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

axoid

Member - Posts: 2

Joined: January 31, 2004

Location: United States

Posted: February 02, 2004 at 6:26 PM / IP Logged

I've searched the forums for wiring for an '02 Audi A4 to no avail. I'm doing a remote start and need to make sure I get all the accessory wires nailed. Also, I need pointers on disabling or bypassing the factory alarm. Any extras would be nice too. IE: the window up down feature when locking/unlocking the car(default from the factory)

Thanks

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 02, 2004 at 6:30 PM / IP Logged

Audi

A4

2002 - 2003

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	RED / Black	Ignition Switch Harness*
Ignition #1:	Black	Ignition Switch Harness
Ignition #2:	Red (thin)	Ignition Switch Harness
Ignition #3:	Blue	Ignition Switch Harness **
Accessory:	Yellow/Black	Ignition Switch Harness
Brake Light:	RED / Black	At Brake Switch
Tach Signal:	Gray	At Coil Pack On Engine
Parking Lights:	Gray	At Headlight Switch
Headlights:	WHITE/ Black (+)	At Headlight Switch
OEM Alarm Disarm:	N/A	Arms/Disarms with Lock/Unlock
OEM Alarm Arm:	N/A
Diesel Glow Plug:	N/A
Clutch Bypass Wire:	No Color Available	Please call with information
Notes:	Second start wire is Blue on 2003. Equipped with Transponder Anti Theft System - Use Universal Alarm Bypass Module 2x402 x can represent any number. Must power with a relay from the remote starts ignition 3. ***All DesignTech remote starters except the 2xx22 have an ignition 3 output - it is the WHITE/ black in the 'control harness.' This wire will be used to control an anti-theft bypass, as well as the relay for ignition 3.

Audi

A4

2002 - 2003

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	Red	Ignition Switch Harness
Starter Kill:	RED / Black	Ignition Switch Harness*
Ignition +12 Volts:	Black	Ignition Switch Harness
Dome Lights/Superv:	BROWN / White (-)	In Driver Kick Panel
OEM Horn:	Black.White (+)	Red # pin connector in drivers kick panel*****
Power Lock:	Blue/White	Drivers door control module
Power Unlock:	PURPLE / Green	Negative Trigger Lock System
Trunk Release:	Yellow/Red	Comfort Module under carpet in front of drivers seat.
Alarm Input Wire:	BROWN / White (-)	In Driver Kick Panel
Notes:	***** Use this wire for 2003 models. Please See Note #201.

Back to Top

axoid

Member - Posts: 2

Joined: January 31, 2004

Location: United States

Posted: February 02, 2004 at 6:40 PM / IP Logged

Thank you Kindly. Thats exactly what I needed.

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 02, 2004 at 6:45 PM / IP Logged

Your Welcome

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Audi A4 security wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.