2002 Chrysler Sebring Alarm/Remote Start Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2002 Chrysler Sebring Alarm/Remote Start Wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sickstyles

Member - Posts: 34

Joined: January 29, 2003

Location: United States

Posted: February 19, 2004 at 11:45 AM / IP Logged

Im installing a remote starter in 2002 sebring 4dr. I cant find the tach wire or a few of the ignition accesory wires i need, if anyone has any information on the car or the colors of the wires please help me out.

thanks, andy

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 19, 2004 at 12:19 PM / IP Logged

Does this help?

Chrysler

Sebring Sedan

2001-2002

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW	IGNITION SWITCH HARNESS
Ignition #1:	BLUE	IGNITION SWITCH HARNESS*
Ignition #2:	GREEN/ RED (SMALL)	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	BLACK/ ORANGE & BLACK/ WHITE	IGNITION SWITCH HARNESS
Brake Light:	WHITE/ TAN (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	ANY WIRE AT COIL OR INJECTOR	THAT IS NOT GREEN OR LT. GREEN
Parking Lights:	BLACK / YELLOW (+)	AT HEADLIGHT SWITCH
Headlights:	PURPLE / WHITE (+)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:	LT. GREEN/ ORANGE	IN A # PIN CONNECTOR AT BCM **
OEM Alarm Arm:	LT. GREEN/ ORANGE	IN A # PIN CONNECTOR AT BCM **
Diesel Glow Plug:	N/A
Clutch Bypass Wire:	N/A
Notes:	* This Vehicle Is Equipped Wiith Chrysler's Smart Key Engine Immobilizer. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. **The Body Control Module (BCM) is attached to the fuse/relay box at the end of the dash on the drivers side.

Chrysler

Sebring Sedan

2001-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	PINK/BLACK	IGNITION SWITCH HARNESS
Starter Kill:	YELLOW	IGNITION SWITCH HARNESS
Ignition +12 Volts:	BLUE	IGNITION SWITCH HARNESS*
Dome Lights/Superv:	TAN & TAN/RED (-)	IN A # PIN CONNECTOR AT BCM **
OEM Horn:	BLACK/ RED (-)	STEERING COLUMN HARNESS
Power Lock:	WHITE/ GREEN	IN A # PIN CONNECTOR AT BCM ' *
Power Unlock:	WHITE/ GREEN	IN A # PIN CONNECTOR AT BCM ' *
Trunk Release:	BLACK/ WHITE (5-WIRE)	IN A # PIN CONNECTOR AT BCM **
Alarm Input Wire:	TAN & TAN/RED (-)	IN A # PIN CONNECTOR AT BCM **
Notes:	*** Lock is positive trigger through a 1800 ohm resistor. Unlock is positive trigger through a 750 ohm resistor.

Back to Top

sickstyles

Member - Posts: 34

Joined: January 29, 2003

Location: United States

Posted: February 19, 2004 at 12:47 PM / IP Logged

Thanks for the wiring info, as for the bypass. I purchased a dei 555U. What company makes the one you described, or is it something i can build with resistors?

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 19, 2004 at 12:59 PM / IP Logged

I believe its made by design tech. Since you already bought one I would just use what you have provided its the correct one for your vehicle.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Chrysler Sebring Alarm/Remote Start Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.