2002 Rodeo installing Crimestopper 2015fm

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2002 Rodeo installing Crimestopper 2015fm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bucsfan97

Member - Posts: 2

Joined: February 23, 2004

Location: United States

Posted: February 23, 2004 at 2:05 AM / IP Logged

This is my first alarm install... I picked one with all the tricks....

A couple questions

1)Do I need both Ignition wires 1&2 (the manual says if necessary)

2)Manual says to use external relays for High Current Ignition and/or Accessory circuit greater that 30A. Will I be OK going with the installed relays with the alarm?

3)Both main RED power wires to the brain (30A) The manual says to hook to battery ... can I tie those in at the switch wiring harness along with Starter, Ignition1,Ignition2, Accessory. I have @ the switch 2 constant battery feeds??

4)I dont have a factory alarm but the wiring diagram I downloaded of the net shows a factory disarm wire yellow/blue (-) in the driver kick panel in a white plug... Do I still need to find this wire and hook it up to the crimestopper alarm prior to remote start

Thanks for any help I would probably be able to figure these things out myself but there is that possibility of messing something up

Back to Top

bucsfan97

Member - Posts: 2

Joined: February 23, 2004

Location: United States

Posted: February 23, 2004 at 2:09 AM / IP Logged

"""""""""

| 12V|white, WHITE/ black |+ |ignition harness |

|

Notes: Is up to the installer to test all wire whenever possible with a DDM

*1 In a white 10 pin connector *2 Located up high in a white connector *3 The keyless module is located to the right of the glove box. *5 Trigger the power lock and the factory alarm arm wires at the same time to arm the alarm. Trigger the power unlock and the factory alarm disarm wires at the same time to disarm the alarm.

Luis

Sound Waves """""""

This is a post I found on the wire diagram

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: February 23, 2004 at 2:15 AM / IP Logged

to answer the alarm disarm wire question, if you have no factory alarm then you dont have to hook up to it and in fact the wire probally doesnt even exist

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Rodeo installing Crimestopper 2015fm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.