2003 Dodge Dakota Alarm

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Dodge Dakota Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

feyo65

Member - Posts: 11

Joined: May 04, 2003

Location: United States

Posted: August 08, 2004 at 10:55 PM / IP Logged

Im trying to find the wire diagram for a 2003 dodge dakota crew cab.does any one know if the wire diagram for a 2000. is the same for a 2003.thanx

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: August 10, 2004 at 7:20 AM / IP Logged

	pink/black & RED / lt. blue	+	ignition harness
Starter	yellow	+	ignition harness
Second Starter	N/A
Ignition	blue	+	ignition harness
Second Ignition	GREEN/ red (18 awg)	+	ignition harness
Third Ignition	RED / white	+	ignition harness
Accessory	BLACK/ orange	+	ignition harness
Second Accessory	green	+	ignition harness
Keysense
Power Lock	WHITE/ green	-	conn. 2, pin 10 @ CTM
Power Unlock	same wire as power lock
Lock Motor	ORANGE / black	5wi	conn. 2, pin 4 @ CTM
Unlock Motor	blue	5wi	conn. 2, pin 6 @ CTM
Parking Lights+	BLACK / YELLOW	+	headlight switch
Parking Lights-	RED / yellow	-	conn. 1, pin 4 @ CTM
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door Trigger	tan & tan/red	-	conn. 2 @ CTM
Dome Supervision	use door trigger
Trunk/Hatch Pin	N/A
Hood Pin
Trunk/Hatch Release	N/A
Power Sliding Door	N/A
Factory Alarm Arm	lt. GREEN/ orange	-	conn. 2, pin 14 @ CTM
Factory Alarm Disarm	same wire as alarm arm
Disarm No Unlock	see factory alarm disarm
Tachometer		ac	ignition coil
Wait to start	N/A
Brake Wire	WHITE/ tan	+	brake pedal switch
Parking Brake
Horn Trigger	BLACK/ red	-	steering column or CTM
Memory Seat 1
Memory Seat 2
Memory Seat 3

Immobilizer Bypass Module

2003 Dodge Dakota Alarm -- posted image.

MAKE : DODGE | MODEL : DAKOTA PICKUP | YEAR : 20

Do it right the first time

feyo65

Member - Posts: 11

Joined: May 04, 2003

Location: United States

Posted: August 14, 2004 at 12:12 AM / IP Logged

im installing an alarm with auto start on it . .... on the instructions it asks the following "green wire -to air conditioner wire -connect keyhole on wire". the same wire then connects to the #86 of the relay i really dont undrstand the directions. ive done reg alarms( without auto start) but they dont ask to conn to the ac and what up with the"key hole on wire" any help would be appretiated.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 14, 2004 at 1:13 AM / IP Logged

Don't know what the alarm means by that. I would assume that the wire would go to a relay and then will act as an ignition wire output like a second ignition. What brand alarm is it.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

feyo65

Member - Posts: 11

Joined: May 04, 2003

Location: United States

Posted: August 15, 2004 at 12:35 AM / IP Logged

its a cheap nitro iso9001 yeah those install directions R mest up. the diagram pic shoes the wire going to the air con(it has a pic of a box and air is coming out of it)LOL.

feyo65

Member - Posts: 11

Joined: May 04, 2003

Location: United States

Posted: August 15, 2004 at 12:39 AM / IP Logged

by the way thanx raydawg for the 03 diagrm thats exactlly what i needed. without it id be %$##@ED

feyo65

Member - Posts: 11

Joined: May 04, 2003

Location: United States

Posted: August 19, 2004 at 11:36 PM / IP Logged

im installing a remote start alarm . its a negative door trigger . (negative when door is opened) the problem im having is that for some reason 20 sec after i shut the door it turns negative on its own. the alarm has a feature that the lights flash when the door is open . so when i turn the truck off and dont activate the alarm after 20 sec. the lights start to flash .it gets on my nerves.for some reason when the alarm is activated this switching of polarity does not affect the operation of the alarm. can some one help me figure out why the polarity all of a sudden changes could the dome light delay have something to do with it . and wer else could i get the door trigger from.or maybe bypassing the switch that makes the polarity switch.

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: August 20, 2004 at 10:10 AM / IP Logged

What type of vehicle is it? You may have to diode isolate it.

Do it right the first time

feyo65

Member - Posts: 11

Joined: May 04, 2003

Location: United States

Posted: August 20, 2004 at 9:54 PM / IP Logged

its in a 2003 dodge dakota i tested the factory vehicle wires with out the diode and it still switches polarity .. i also tested the wires without the diode and it still switched ...... does the size of the diode matter if its to big will it still switch polarity....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Dodge Dakota Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.