the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

AstroStart remote starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
neonchuck 
Member - Posts: 2
Member spacespace
Joined: September 06, 2004
Location: Canada
Posted: September 06, 2004 at 5:45 PM / IP Logged  

Hey all.  Today I installed a remote starter on my 1995 Dodge Neon.  It is a used unit I pulled from another vehicle. Everything works fine except the starter runs on after the car starts until I tap the brake to shut the car off.  I have the tach sense wire in the right place. If I start the car with the remote and then attach the tach wire, the starter kicks out and everything works as it should. I've installed a few starters but this one has thrown me for a curve. The manufacturer does not provide installation instructions or literature to the end user. I have no idea if the starter is set up for tach sense or voltage sense monitoring. There are 9 dip switches but no indication what the settings are.

The unit is an AstroFlex model 500. I'm guessing it is about 10 years old.

Thanx all and any help would be greatly appreciated.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 07, 2004 at 9:14 AM / IP Logged  
Did you learn the tach signal off the car to the AstroFlex unit ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
neonchuck 
Member - Posts: 2
Member spacespace
Joined: September 06, 2004
Location: Canada
Posted: September 07, 2004 at 2:04 PM / IP Logged  
Hey Jeff. Thanx for the reply. I have no documentation on the starter. Not sure of the procedure. Thanx again.
BoominRolla 
Copper - Posts: 198
Copper spacespace
Joined: September 06, 2004
Location: United States
Posted: September 08, 2004 at 10:55 PM / IP Logged  

Hey we install astro but not back then I can get the info from work for ya its just a simple programming with some of the 9 dip switches ...and your done. If you still need help I think we have a data base in our computer for that reply to this post and i'll keep checking on it to see if you need help... Its just your tach setting is too low or high one or the two I think its too high... Do you have a tach sense tester? can you get me a reading off the wire you're using what rpm and amount of cylinders...

CementBrain 
Copper - Posts: 61
Copper spacespace
Joined: September 21, 2004
Location: Canada
Posted: September 22, 2004 at 9:25 PM / IP Logged  
Hey, I have the installation Manual for the AstroSart(AstroFlex) Series 500, 1100, 2100, 4100.
E-mail me and I'll send it to you. I'm looking for th Installation Manual for the AstroStart 803.AstroStart remote starter -- posted image.
CementBrain
Obeliever 
Member - Posts: 1
Member spacespace
Joined: September 28, 2004
Location: United States
Posted: September 29, 2004 at 9:17 PM / IP Logged  
I need  the install manuals for astroflex 1100 and mv 802.
Homeboy
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: October 05, 2004 at 9:37 PM / IP Logged  
Email me and I can send you any manual you need. Email, not PM. There is alink in my profile.
J Rilla
Owner/Installer
kevins11 
Member - Posts: 1
Member spacespace
Joined: January 23, 2004
Location: Canada
Posted: October 25, 2004 at 3:01 PM / IP Logged  
jrilla wrote:
Email me and I can send you any manual you need. Email, not PM. There is alink in my profile.
Shadow_750 
Member - Posts: 1
Member spacespace
Joined: November 14, 2004
Location: Canada
Posted: November 14, 2004 at 1:14 PM / IP Logged  

Hey I also need the install manual for the astroflex 1100. Can someone email this to me please. It would be greatly appreciated!

shadow_750

rnichols03063 
Member - Posts: 2
Member spacespace
Joined: November 14, 2004
Posted: November 14, 2004 at 1:39 PM / IP Logged  
Shadow_750 wrote:

Hey I also need the install manual for the astroflex 1100. Can someone email this to me please. It would be greatly appreciated!

shadow_750

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer