1992 Ford F-150 remote starter

Thanks for all of your help.  Does anyone have the ignition wiring diagram for a 1992 Ford F-150?  Also, does anyone know what the bonnet sensor on this starter does and where it should be mounted?  Thanks Guys!f150fixer

Here is the wiring as far as the other thing I am not familiar with that kind of starter.

ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|yellow              |+  |ignition harness            ||          STARTER|RED / lt. blue        |+  |ignition harness            ||         IGNITION|RED / lt. green       |+  |ignition harness            ||        ACCESSORY|gray / YELLOW         |+  |ignition harness            ||       POWER LOCK|pink / YELLOW         |5wi|pass kick panel *1          ||     POWER UNLOCK|pink/green          |5wi|pass kick panel *1          || PARKING LIGHTS +|brown               |   |lt switch or dr kick        ||       HEADLIGHTS|RED / yellow          |+  |at switch                   ||     DOOR TRIGGER|BLACK/ blue          |+  |driver kick panel           ||       TACHOMETER|tan / YELLOW *2       |   |at coil                     ||       BRAKE WIRE|lt. green           |+  |brake pedal switch          ||     HORN TRIGGER|dk. blue            |-  |steering column             ||           WIPERS|                    |   |                            ||  LF WINDOW UP/DN|yellow - red        |A  |in drivers door             ||  RF WINDOW UP/DN|yel/blk - RED / blk   |A  |in drivers door or pkp      |

Notes:

*1 ESSENTIAL to use driver's switch when testing for switch and motor sides. E-brake bracket blocks easy access from driver's side.  *2 On diesel trucks use WHITE/ black at the alternator for tach. Also the wait to start wire is BLACK/ pink (-) at the warning light on the dash or the glow plug controller on the center rear of the engine.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.