2001 Buick Century
Welcome Guest :)
Parkdaddy02
Member -
Posts: 28
Joined: October 25, 2002
Location: United States
Posted: November 14, 2002 at 6:37 PM / IP Logged
Can anyone get me the wiring diagram for a 2001 buick century.
Thanks,
Eric
Velocity Motors
Moderator -
Posts: 12,488
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 14, 2002 at 8:16 PM / IP Logged
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|red |+ |ignition harness || STARTER|yellow |+ |ignition harness || IGNITION|pink |+ |ignition harness || SECOND IGNITION|white or green |+ |ignition harness || ACCESSORY|orange |+ |ignition harness || POWER LOCK|RED / black |- |drivers kick or BCM *2 || POWER UNLOCK|ORANGE / black |- |drivers kick or BCM *2 || LOCK MOTOR|gray | |drivers kick panel || UNLOCK MOTOR|tan | |drivers kick panel || DISARM DEFEAT|tan | |passengers kick panel || PARKING LIGHTS +|lt. blue | |at switch *1 || HEADLIGHTS|yellow |- |at switch || DOOR TRIGGER|dark blue/white |- |drivers kick or BCM *2 || DOME SUPERVISION|use door trigger | | || TRUNK/HATCH PIN|ORANGE / black |- |light in trunk or BCM *2 ||TRNK/HTCH RELEASE|brown |- |BCM *2 || TACHOMETER|pur/wht or white | |ignition control module || SPEED SENSE|GREEN / WHITE | |ECM under hood *3 || BRAKE WIRE|white |+ |brake pedal switch || HORN TRIGGER|black |- |steering column || WIPERS| | | || LF WINDOW UP/DN|blue - brown |A |drivers door switch || RF WINDOW UP/DN|lt blue - tan |A |drivers switch or kick panel|| LR WINDOW UP/DN|green - purple |A |drivers switch or kick panel|| RR WINDOW UP/DN|lt green - purple |A |drivers switch or kick panel|Notes:
NOTE: This vehicle is equipped with PASS-Key II (VATS). . *1 Larger of the two at the light switch. Can also find BROWN / white in the passenger kick panel in the harness to the rear. *2 BCM is to the left of the steering column *3 ECM is in the air cleaner assembly.Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Parkdaddy02
Member -
Posts: 28
Joined: October 25, 2002
Location: United States
Posted: November 14, 2002 at 8:38 PM / IP Logged
also can anyone tell me what the resistance is on the key because i need to figure out what size resistor to use.
Thanks,
Eric
Player69
Silver -
Posts: 504
Joined: October 27, 2002
Posted: November 14, 2002 at 8:42 PM / IP Logged
You need to read it with an DMM. They are all different.
securinu
Silver -
Posts: 772
Joined: September 15, 2002
Location: United States
Posted: November 14, 2002 at 8:42 PM / IP Logged
you need to measure it thru the wire or get a bypass that learns the resistance.
Parkdaddy02
Member -
Posts: 28
Joined: October 25, 2002
Location: United States
Posted: November 14, 2002 at 10:08 PM / IP Logged
can someone give me a diagram on how this hooks up with the resistor and relay
Thanks,
Eric
Parkdaddy02
Member -
Posts: 28
Joined: October 25, 2002
Location: United States
Posted: November 15, 2002 at 8:19 AM / IP Logged
how many watts should the resistor be
Thanks,
Eric
Chris Luongo
Platinum -
Posts: 3,746
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: November 15, 2002 at 8:31 PM / IP Logged
Most any good remote start includes a section on VATS bypass.
Follow the12volt.com
Thursday, April 18, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
Topic Closed)
Members
Search
Register
Login
Printable version
