the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Mannix SM700 and Remote Start Problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
Powermyster 
Silver - Posts: 962
Silver spacespace
Joined: April 06, 2005
Location: Ireland
Posted: June 08, 2005 at 6:04 PM / IP Logged  
Iglock as you call it should be programmable try probram it
mirz 
Member - Posts: 17
Member spacespace
Joined: June 06, 2005
Location: Australia
Posted: June 08, 2005 at 6:22 PM / IP Logged  
yes that very right, IGLock is programmable, and you can turn this ON/OFF.
its definately ON. as i can it on remote as well.
tried it many times, but never worked.
yesterday while driving aroung 100 km/h on highway, all in a sudden this function worked, and all doors locked automaticaly.
Montrealler 
Copper - Posts: 155
Copper spacespace
Joined: October 05, 2002
Location: Canada
Posted: June 08, 2005 at 9:31 PM / IP Logged  
I dont know the brand of starter you are using. Most of the manual transmission remote starter need you to hook up Hand brake wire and door trigger.
Also as a safety purpose you will need to do a precise sequence to let know the starter that you have left the vehicle in a safe way (We mean here running in neutral and a door have been open so that mean you are outside the car and it is still running so it's safe to shut it down and to re-start it.
If you have the installation guide or a link to it I coul maybe help you.
mirz 
Member - Posts: 17
Member spacespace
Joined: June 06, 2005
Location: Australia
Posted: June 08, 2005 at 10:04 PM / IP Logged  
1 - one wire is attached to handbreak as instructed by alarm manual. remote start only try to start my car if handbreak is pulled, otherwise it gives 3 beeps, and does not try to start at all. so i assume its doing its job.
2 - Door Trigger is connected as well. when i disarm my car, Blue LED starts flashing on fast speed. as soon as i open driver door, it turns Blue LED OFF. if i dont open door, it re-arm itself after 30 seconds.
3 - I am trying to do remote start with locked doors and under armed mode, with pulled hand break and gear bar in neutral.
both following are in Adobe PDF format.
installation manual:
http://www.boomspeed.com/melissaseow/MannixInstallationManual.pdf
user manual:
http://www.boomspeed.com/melissaseow/MannixUserManual.pdf
mirz 
Member - Posts: 17
Member spacespace
Joined: June 06, 2005
Location: Australia
Posted: June 09, 2005 at 6:38 AM / IP Logged  
what voltage should i expect on Tach wire?
currently the wire i connected is giving me 28-31 AC volts. am i using correct wire.
checked on few internet websites, which says that it should be between 12-14 AC volts.
pls help.
mirz 
Member - Posts: 17
Member spacespace
Joined: June 06, 2005
Location: Australia
Posted: June 10, 2005 at 6:04 AM / IP Logged  
can someone pls help.......
Powermyster 
Silver - Posts: 962
Silver spacespace
Joined: April 06, 2005
Location: Ireland
Posted: June 10, 2005 at 6:27 AM / IP Logged  
i've heard that it should be 5 or 6 volts AC and it will rise with the acceleration thats how to spot it...
mirz 
Member - Posts: 17
Member spacespace
Joined: June 06, 2005
Location: Australia
Posted: June 14, 2005 at 7:15 PM / IP Logged  
5-6 volts with running engine or wihtout??
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer