speed pulse wire 05 Mustang

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / speed pulse wire 05 Mustang (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

swieduwi

Member - Posts: 5

Joined: July 28, 2005

Location: United States

Posted: July 28, 2005 at 7:00 AM / IP Logged

I am installing a Pioneer AVIC-D1 unit in a 2005 Mustang GT and was wondering if anyone knows where I can find the Speed Pulse wire to connect the pink lead from the radio?

Back to Top

azdoi

Member - Posts: 17

Joined: August 05, 2005

Location: United States

Posted: August 05, 2005 at 1:20 AM / IP Logged

try looking at the PCM it's a 104 pin connector, pin # 68 WHITE/ orange. The PCM claims to be in the pass kick panel

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 05, 2005 at 8:02 AM / IP Logged

Try this location as well :

Speed Sense

DARK BLUE / YELLOW

(AC)

PIN 3 OF THE 50 CONNECTOR (C175E) OF THE PCM

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

neverenuf81

Member - Posts: 8

Joined: March 01, 2004

Location: United States

Posted: August 26, 2005 at 11:53 AM / IP Logged

Most '05 Fords have teh VSS right in the harness. I know the Metra harness has a pink wire right on it. It's up there for the Speed Sensitive Volume on their "audiophile package"

AVHP7500DVD, AVIC80DVD, GEXP5700TV, MB Quart QSD 3way front, QSD 213 rear, JL 450/4, 2 12W6v2, JL1000/1

Back to Top

rmtoberman

Member - Posts: 8

Joined: September 10, 2005

Location: United States

Posted: September 28, 2005 at 9:50 PM / IP Logged

I emailed Metra and the VSS is not in the harness for the Mustang. Also, the headlight switch does not go to the harness. Metra said that ford uses a signal line to feed this information so it cannot be used for turning on the lights of your head unit.

I also removed the PCM in the kick panel and did not find a connector 104, there are around 5 connectors going to this box, and none of them look even had 68 wires.

I used one of the twisted pair wires coming from the left rear tire. This works some of the time for my Kenwood DV-4100 nav, but sometimes the speed input to the nav reads 0mph when I am driving and my position on the moving map does not change.

I wonder if the speed data going to the speedometer can be tied into?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

speed pulse wire 05 Mustang

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.