Wiring Diagram for 2001 BMW 530i
Welcome Guest :)
Ry328is
Member -
Posts: 7
Joined: December 10, 2002
Location: United States
Posted: December 10, 2002 at 8:30 AM / IP Logged
I'm thinking about installing a remote starter for a 2001 BMW 530i. Can someone please give me the wiring diagram for this car? Thanks, Ry
10nesne1
Silver -
Posts: 284
Joined: June 19, 2002
Location: British Columbia, Canada
Posted: December 10, 2002 at 9:58 AM / IP Logged
Remote Starter Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Start: | | | BLACK / YELLOW | IGNITION SWITCH HARNESS * |
Ignition #1: | | | GREEN | IGNITION SWITCH HARNESS |
Ignition #2: | | | SECOND GREEN | IGNITION SWITCH HARNESS |
Ignition #3: | | | N/A | |
Accessory: | | | BLACK / YELLOW | IGNTION SWITCH HARNESS |
Brake Light: | | | BROWN / GRAY | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | | BLACK / YELLOW OR BLACK | AT BACK OF INSTRUMENT PANEL * |
Parking Lights: | | | BLACK | AT LIGHT SWITCH ** |
Headlights: | | | | |
OEM Alarm Disarm: | | | ARMS WITH LOCKS | |
OEM Alarm Arm: | | | DISARMS WITH UNLOCKS | |
Diesel Glow Plug: | | | N/A | |
Clutch Bypass Wire: | | | N/A | |
Notes: | | * This vehicle is equipped with a transponder immobilizer system. See Installation Note #144 - Bypassing Transponder Theft Systems. ** Cut This Wire In Half. Connect One Side To Pin #87a Of A Relay And Connect The Other Side To Pin #30 Of The Same Relay. Wire Pin #85 To Ground And Connect Pin #86 To The Yellow Light Wire Coming From The AutoCommand. When The Wire Is Interrupted, The Parking Lights Will Come On. |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Constant +12 Volts: | | | RED | IGNITION SWITCH HARNESS |
Starter Kill: | | | BLACK / YELLOW | IGNITION SWITCH HARNESS * |
Ignition +12 Volts: | | | GREEN | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | | BLUE/RED (+) | AT MAIN DOME LAMP SWITCH *** |
OEM Horn: | | | | |
Power Lock: | | | BLUE/RED (+) | INSIDE OF DRIVER'S DOOR **** |
Power Unlock: | | | BLACK/ WHITE (+) | INSIDE OF DRIVER'S DOOR **** |
Trunk Release: | | | BRAY/BROWN (-) | AT RELEASE SWITCH IN DRIVER'S KICK |
Alarm Input Wire: | | | BLUE/RED (+) | AT MAIN DOME LAMP SWITCH *** |
Notes: | | *** Use A Relay To Reverse The Polarity To Negative. **** See Installation Note #202 - Positive Trigger Door Lock Diagram. |
Follow the12volt.com
Thursday, April 25, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.