the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Ford Crown Victoria PI, Remote Start Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
rngr522 
Member - Posts: 1
Member spacespace
Joined: November 15, 2005
Location: United States
Posted: November 15, 2005 at 1:33 PM / IP Logged  
Does anyone have wiring info for installing a keyless entry/remote start unit into a 2005 Ford Crown Victoria PI?
Thanks
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 15, 2005 at 1:51 PM / IP Logged  

I use the OMEGA:

Ford/Mazda Transponder Interface: Encrypted PATS3 (IB-F3)
    2005 Ford Crown Victoria PI, Remote Start Wiring -- posted image.
2005 Ford Crown Victoria PI, Remote Start Wiring -- posted image.Ford/Mazda Transponder Bypass: PATS 3 Encrypted Key (IB-UF2)
    2005 Ford Crown Victoria PI, Remote Start Wiring -- posted image.

Constant 12 voltsLT GREEN/ VIOLET 20AMPRED 25AMP IGNITION SWITCH HARNESS
Ignition 12 voltsVIOLET/ORANGEIGNITION SWITCH HARNESS
StarterDK GREENIGNITION SWITCH HARNESS
Dome LightBLACK/ LT BLUE (+)IN 16 PIN CONNECTOR IN DRIVER KICK
Trunk Pin SwitchBROWN / WHITE (-)PIN 5 GRAY 16 PIN CONNECTOR AT LCM*
Parking LampBROWN (+)PIN 4 BLACK CONNECTOR AT LCM*
Power LockPINK / YELLOWDRIVER KICK PANEL**
Power UnlockPINK/LIGHT GREENDRIVER KICK PANEL**
*LCM (Lighting Control Module) Is Located To The Right Of The Steering Column
**With OEM Keyless Vehicle Is Positive Pulse
With Out Keyless Vehicle Is Reversal Rest At Ground.

Accessories
Window UpD\WHT/BLK P\TAN/LT BLU D\YEL/LT BLU P\RED / BLK @MAIN SWITCH
Window DownF / YELLOW F/WHT/YEL R/YEL/ORNG R/YEL\BLK
Ign Key WarnBLACK/ PINK (-)IGNITION SWITCH HARNESS
Trunk ReleaseVIOLET / YELLOWDRIVER KICK, HARNESS TO REAR
OEM HornDARK BLUE (-)STEERING COLUMN HARNESS
HeadlightsRED / BLACK (+)AT HEADLIGHT SWITCH
OEM Alarm ArmNOT SHOWN IN SHOPMANUAL
OEM Alarm DisarmNOT SHOWN IN SHOPMANUAL

Reversal Rest At Ground Window Circuit 

Reversal Rest At Ground Trunk Release
OEM Security Horn Wire: YELLOW/LIGHT GREEN At Horn Or At Battery Junction Box Harness.

Remote Start
Tach SignalNOT RED OR RED / GREENANY IGNITION COIL OR INJECTOR
Ignition #2GRAY / YELLOWIGNITION SWITCH HARNESS
Ignition #3WHITE/ LT BLUEIGNITION SWITCH HARNESS*
AccessoryWHITE/ VIOLETIGNITION SWITCH HARNESS
Neutral SafetyNOT GROUNDING TYPE
Brake LightLT GREEN/ RED (+)AT SWITCH ABOVE BRAKE PEDAL
Reverse LightBLACK/ PINK (+)AT REAR LIGHTS
Rear Window DefrostGRAY/BLUE (-) PIN 12OF A 22 PIN CONN AT THE LCM*

Immobilizer Bypass

*LCM (Lighting Control Module) Is Located To The Right Of The Steering Column Ignition Input To Keyless: DARK BLUE At Pin 12 Of A 12 Pin Connector In Passegners Kick Panel.

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
ccomm911 
Member - Posts: 4
Member spacespace
Joined: January 13, 2006
Location: United States
Posted: January 13, 2006 at 12:05 PM / IP Logged  
Is there a "plug & play" keyless entry system for a 2006 Crown Vic Police P71 w/o factory keyless entry?  What about adding a keypad to a car w/o any factory keyless, and or in conjunction with an afternarket system?  Thanks in advance.
J.R. Carmichael, Jr.
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: January 13, 2006 at 1:18 PM / IP Logged  
No "Plug & Play"....that I am aware of.......Have to hardwire......even the Ford Parts unit
We use a Door Keypad that is sold by Mito Corp. KE-1601
www.mitocorp.com
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
kc5niy 
Member - Posts: 3
Member spacespace
Joined: April 06, 2004
Location: United States
Posted: January 19, 2006 at 10:33 PM / IP Logged  

Can anyone tell me what wire (color) and the location of the wire of the vehicle speed sensor for a 2005 CVPI. I am assuming that the connection will be near the pcm.

Thanks

kc5niy
ccomm911 
Member - Posts: 4
Member spacespace
Joined: January 13, 2006
Location: United States
Posted: January 21, 2006 at 10:24 AM / IP Logged  
The speed sensor wire is gray with a black stripe.  Should be in the plug or blunt cut wires under the glove box - a 18 or 20 gauge wire.  I am assuming this is for radar sync?  Good luck.
J.R. Carmichael, Jr.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer