2002 Pontiac Grand Prix Alarm/Remote Start Wiring

Installing a remote starter/keyless entry in a 2002 Grand Prix with Passlock 3. Anybody having diagram/ info please post. Have not done a passlock 3. Anything different I need to know? Thanks

For the Passlock III, I suggest using a bypass module for ease of installation. Use a PKG-4 bypass module here: http://www.velocitymotorsport.com/security/gmc_transponder.htm. Here is the wiring diagram for this car:

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|red & RED / white     |+  |ignition harness            |

|          STARTER|yellow              |+  |ignition harness            |

|         IGNITION|pink                |+  |ignition harness            |

|  SECOND IGNITION|white               |+  |ignition harness            |

|        ACCESSORY|orange              |+  |ignition harness            |

|       POWER LOCK|lt. blue            |-  |driver kick panel           |

|     POWER UNLOCK|white               |-  |driver kick panel           |

|       LOCK MOTOR|gray                |   |driver kick panel           |

|     UNLOCK MOTOR|tan                 |   |driver kick panel           |

|    DISARM DEFEAT|tan                 |   |passenger kick panel        |

| PARKING LIGHTS +|brown               |   |at switch                   |

|       HEADLIGHTS|yellow              |+  |at switch                   |

|     DOOR TRIGGER|tan and dark blue   |-  |*1                          |

| DOME SUPERVISION|use door trigger    |   |                            |

|  TRUNK/HATCH PIN|RED / black           |-  |under rear deck             |

|TRNK/HTCH RELEASE|BLACK/ white         |+  |at switch                   |

|FCTRY ALRM DISARM|ORANGE / black        |-  |driver kick panel           |

|       TACHOMETER|white               |   |pin 8, conn. 2 @ PCM *3     |

|      SPEED SENSE|dk.green            |4  |*2                          |

|       BRAKE WIRE|white               |+  |stop light switch           |

|     HORN TRIGGER|black               |-  |steering column             |

|           WIPERS|gray                |+  |steering column             |

|  LF WINDOW UP/DN|dk. blue - brown    |A  |LF window motor in door     |

|  RF WINDOW UP/DN|lt. blue - tan      |A  |drivers kick panel          |

|  LR WINDOW UP/DN|dk. green - purple  |A  |drivers kick panel          |

|  RR WINDOW UP/DN|lt. green - purple  |A  |drivers kick panel          |

Notes:

NOTE:  This vehicle is equipped with the pass-key III immobilizer. Use a PKG-4 bypass module here: http://www.velocitymotorsport.com/security/gmc_transponder.htm. to bypass during remote start mode.  *1 The tan is located in the drivers kick and catches only the drivers door.  The dark/blue is located in the passenger kick panel and catches all other doors, must diode isolate these wires.   *2  Located at a 10 pin plug on the front of the drivers strut tower. There are two dk.green wires there, use the one in the corner of the plug.  *3 The PCM (Powertrain Control Module) is in the air cleaner assembly.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA