2001 F350 alarm wiring

need wire diagram for basic alarm with locks has no keyless entry thanks

DIRECTWIRE™ WIRING INFORMATION - FORD / F SERIES SUPER DUTY / 2001 / Security 12volts yellow & lt. GREEN/ purple   +   ignition harness Starter RED / lt. blue   +   ignition harness Ignition RED / black (larger of 2)   +   ignition harness Power Lock pink / YELLOW        Notes: Non-keyless versions are 5 wire located in the driver door harness. Keyless versions are negative trigger located in a gray molex plug to the right side of the steering column. Power Unlock pink/lt. green        Notes: Non-keyless versions are 5 wire located in the driver door harness. Keyless versions are negative trigger located in a gray molex plug to the right side of the steering column. Lock Motor pink/black   5wi driver kick, door harness Unlock Motor pink/black or RED / orange   5wi driver kick, door harness Disarm Defeat pink/orange   5wi pass. kick, door harness Parking Lights+ brown   +   headlight switch Parking Lights-           Hazards           Turn Signal(L)           Turn Signal(R)           Door Trigger BLACK/ lt. blue   +   gray plug right of column Dome Supervision use door trigger        Trunk/Hatch Pin N/A        Hood Pin N/A        Trunk/Hatch Release N/A        Power Sliding Door N/A        Factory Alarm Arm N/A        Factory Alarm Disarm N/A        Disarm No Unlock N/A        Tachometer WHITE/ pink   ac   instrument cluster or PCM Notes: Can also be located in the main harness that runs on the inside of the firewall to the left of the brake pedal. Horn Trigger dk. blue   -   steering column Memory Seat 1           Memory Seat 2           Memory Seat 3           Interface Module: Category: Immobilizer Bypass Required: No Type: N/A Part #: N/A Notes: Smart Starter Kill Relays: Not Available        This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter. Directed Electronics assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information. Be careful whose advice you buy, but be patient with those who supply it.