the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Lincoln Blackwood 02 wiring diag.

Home / the12volt's Install Bay / General Discussion / Lincoln Blackwood 02 wiring diag. (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
gmc4x4 
Copper - Posts: 62
Copper spacespace
Joined: December 26, 2002
Location: United States
Posted: January 26, 2003 at 5:23 PM / IP Logged  

Am looking for wiring diagram for RS...

Also need advise on the immobilizer. The lincoln site sells a Securilock 3 system. Someone else suggested  a UNIVERSAL IMMOBILIZER REMOTE START INTERFACE 555U. Anyone have any suggestions as to which to use?? Which is easier/better/reliable?

Also is it possible to use the navigation screen for other things such as a DVD player or anything??

Thanks for your time!!!!

 

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 26, 2003 at 6:14 PM / IP Logged  

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|yellow & lt. grn/pur|+  |ignition harness            |
|          STARTER|RED / lt. blue        |+  |ignition harness            |
|         IGNITION|blue/lt. green      |+  |ignition harness            |
|  SECOND IGNITION|gray / YELLOW         |+  |ignition harness            |
|        ACCESSORY|RED / black           |+  |ignition harness            |
| SECOND ACCESSORY|BLACK/ lt. green     |+  |ignition harness            |
|       POWER LOCK|pink / YELLOW         |-  |pin 17, 22 pin plug @ CSM *1|
|     POWER UNLOCK|pink/lt. green      |-  |pin 9, 22 pin plug @ CSM *1 |
|       LOCK MOTOR|pink/black          |   |pin 22, 22 pin plug @ CSM *1|
|     UNLOCK MOTOR|RED / orange          |   |pin 1, 26 pin plug @ CSM *1 |
|    DISARM DEFEAT|pink/orange         |   |pin 11, 22 pin plug @ CSM *1|
| PARKING LIGHTS +|brown               |   |headlight switch            |
|       HEADLIGHTS|RED / yellow          |+  |headlight switch            |
|     DOOR TRIGGER|*2                  |-  |pins 5-8, upper plug @GEM *3|
| DOME SUPERVISION|use door trigger    |   |                            |
|  TRUNK/HATCH PIN|brn/yel & tan *4    |-  |tonneau cover control mod *4|
|TRNK/HTCH RELEASE|*5                  |-  |22 pin plug @ CSM *1        |
|       TACHOMETER|*6                  |   |any ignition coil           |
|      SPEED SENSE|gray/black          |   |back of fusebox or at radio |
|       BRAKE WIRE|lt. green           |+  |brake pedal switch          |
|     HORN TRIGGER|blue                |-  |steering column or CSM *1   |
|           WIPERS|red (L), white (H)  |+  |windshield wiper motor      |
|  LF WINDOW UP/DN|wht/blk - org/wht   |A  |driver window MOTOR         |
|  RF WINDOW UP/DN|tan/lt blu - wht/yel|A  |driver kick panel           |
|  LR WINDOW UP/DN|yel/lt blu - gry/org|A  |driver kick panel           |
|  RR WINDOW UP/DN|RED / blk - yel/blk   |A  |driver kick panel           |
| SUN RF OPN/CLOSE|not recommended     |   |                            |
|        RADIO 12V|lt. GREEN/ purple    |+  |radio                       |
|     RADIO GROUND|BLACK/ lt. green     |-  |radio                       |
|     RADIO SWITCH|pink/lt. green      |+  |radio                       |
| RADIO ILLUMINATE|lt. blu/red (dimmer)|+  |radio                       |
|       LF SPEAKER|org/lt grn-lt blu/wh|   |radio                       |
|       RF SPEAKER|wht/lt grn - grn/org|   |radio                       |
|       LR SPEAKER|gry/lt blu - tan/yel|   |radio                       |
|       RR SPEAKER|org/red - brn/pnk   |   |radio                       |

Notes:

NOTE:  Some models of this vehicle are equipped with PATS (Passive Anti Theft System).  Use DEI module 555U to over-ride during remote start.  *1 The CSM (Central Security Module) is up high in the driver kick panel.  *2 The driver door trigger is BLACK / YELLOW, the front passenger door is BLACK/ pink, the left rear door is BLACK/ lt. blue, and the right rear door is BLACK/ white. Use all four and diode isolate each. Refer to directfax document #1076 for wiring information.  *3 The GEM (Generic Electronic Module) is attached to the back of the fuse box.  *4 These are the door trigger wires for the 2 cargo doors. The tonneau cover control module is on the front passenger side of the cargo bed.  *5 Tonneau cover open is WHITE/ red in pin 7, and close is pink/lt. green in pin 20.  *6 For tach go to any of the ignition coils and use the wire that is NOT RED / lt. green.

http://www.velocitymotorsport.com/images/install_notes/116.jpg

Click the above link for a DIY universal bypass module

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
gmc4x4 
Copper - Posts: 62
Copper spacespace
Joined: December 26, 2002
Location: United States
Posted: January 26, 2003 at 8:21 PM / IP Logged  

OK a few questions..I want to install a AutoPage750LCD. For the Tonneau cover, can I make the trunk button on the remote, raise and lower or will i have to use the trunk button to Raise and another channel to lower?

About diodes..does anyone have a diagram or some helpful hint on wiring the lock/unlock wires?

thanks

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 27, 2003 at 8:14 AM / IP Logged  
You will need two separate channels to raise and lower the tonneau. Use a power window control module for this if the lift mechanism is eletronic and rests at ground.  Why do you need diodes for the locking wires ? Do you mean the door trigger isolation  ? I will send you the information to your email address.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer