the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Chevy cobalt radio wire colors


Post ReplyPost New Topic
< Prev Topic Next Topic >
vdaman 
Member - Posts: 1
Member spacespace
Joined: January 09, 2007
Location: United States
Posted: January 09, 2007 at 2:39 AM / IP Logged  
Looking for the radio wiring color code on a 2005 chevy cobalt.
Twelvoltz 
Platinum - Posts: 2,376
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: January 09, 2007 at 6:58 AM / IP Logged  
DEI Lists:
DIRECTWIRE™ WIRING INFORMATION - CHEVROLET / COBALT / 2005 / Audio
[PRINT THIS PAGE]
Radio 12v      RED / white       +       radio harness
Radio Ground      BLACK/ white       -       radio harness
Radio Ignition      (GMLAN Serial Data)            
Radio Illumination      N/A            
Factory Amp Turn-on      pink       +       radio harness
Power Antenna      yellow       +       radio harness
LF Speaker +/-      tan - gray       +,-      radio harness or amp under driv dash
RF Speaker +/-      lt. green - dk. green       +,-      radio harness or amp under driv dash
LR Speaker +/-      brown - yellow       +,-      radio harness or amp under driv dash
RR Speaker +/-      dk. blue - lt. blue       +,-      radio harness or amp under driv dash
Interface Module:      Category:
Immobilizer Bypass      Required:
Yes      Type:
Passlock
Part #: N/A
Notes: See DirectFax document 1603 for wiring information.
Interface Module:      Category:
Door Lock Interface      Required:
No      Type:
Data Bus
Part #: IM-GMSD-1
Alternate Part1 #: 456LW
Notes:
Smart Starter Kill Relays:      Relay Type:
Crank Relay      Location:
Engine compartment fusebox, Driver side
Part #: 6402A
warning      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed Electronics assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 23, 2017 • Copyright © 1999-2017 the12volt.com Donate to the12volt.com Advertising Top of Page
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Donate to the12volt.com
Top
the12volt.com spacer
the12volt.com spacer