the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 Nissan Sentra, Remote Start Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
chiarlanza 
Member - Posts: 30
Member spacespace
Joined: January 17, 2005
Location: United States
Posted: January 21, 2007 at 12:26 PM / IP Logged  
Looking for the specs to install a remote start on an 03 Nissan Sentra. 
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 24, 2007 at 8:16 AM / IP Logged  
PART  COLOR LOCATION
 12 VOLT CONSTANT  WHITE/ RED (+)   IGNITION SWITCH HARNESS
 STARTER BLACK/ WHITE (+) See NOTE *1  IGNITION SWITCH HARNESS
 STARTER 2 BLACK / YELLOW (+) See NOTE *1 IGNITION SWITCH HARNESS
 IGNITION 1 BLACK/ RED (+) IGNITION SWITCH HARNESS
 IGNITION 2 N/A 
 IGNITION 3 N/A  
 ACCESSORY /HEATER BLOWER 1 WHITE (+)  IGNITION SWITCH HARNESS
 ACCESSORY /HEATER BLOWER 2 WHITE/ BLUE (+)  IGNITION SWITCH HARNESS
 KEYSENSE N/A  
 PARKING LIGHTS ( - ) N/A  
 PARKING LIGHTS ( + ) WHITE/ RED (+) or RED / BLUE (+)  IN DRIVERS KICK PANEL or HEADLIGHT SWITCH
 POWER LOCK GRAY (TYPE B)  @ SECU, See NOTE *2
 POWER UNLOCK PURPLE / RED (TYPE B)  @ SECU, See NOTE *2
 DOOR TRIGGER See NOTE *3  @ SECU, See NOTE *2
 DOMELIGHT SUPERVISION RED / YELLOW (-)  @ SECU, PIN 8, See NOTE *2
 TRUNK RELEASE RED (-)  @ HATCH RELEASE SWITCH
 SLIDING POWER DOOR N/A  
 HORN WHITE/ GREEN (-)  @ STEERING COLUMN HARNESS
 TACH ANY WIRE BLACK/ RED, PURPLE, BLUE/RED or GRAY/RED  @ ANY IGNITION COIL
 WAIT TO START LIGHT N/A  
 BRAKE RED / GREEN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM  WHITE/ BLUE(-)  @ SECU, PIN 30, See NOTE *2
 ANTI-THEFT TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY  TRANSPONDER @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold. NOTE *2 THE SECU (Security Electronic Control Unit) IS LOCATED TO THE RIGHT OF STEERING COLUMN. NOTE *3 ON VEHICLES WITHOUT POWER DOORLOCKS USE RED / WHITE (-) IN DRIVERS KICK PANEL. ON VEHICLES WITH POWER DOORLOCKS, USE RED (-) FOR DRIVERS DOOR AND RED / WHITE (-) FOR PASSENGER DOOR, WHEN CONNECTING TO AN ALARM SYSTEM USE BOTH DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, See DIAGRAM

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer