alpine cd changer error 01

Home / the12volt's Install Bay / Car Audio / alpine cd changer error 01 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jimmysolo2001

Member - Posts: 13

Joined: May 12, 2002

Location: Jamaica

Posted: May 23, 2002 at 6:25 PM / IP Logged

help alpine 6 disc cd changer 5952z came up with error1 disc malfuntion or magazine malfunction try reset did not help.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 24, 2002 at 1:37 AM / IP Logged

You have a disc jammed in the changer that came out of it's cartridge. Take off the changer casing and manaully eject the cartridge. Find the disc that's jammed and remove it. Should work after this.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

jimmysolo2001

Member - Posts: 13

Joined: May 12, 2002

Location: Jamaica

Posted: May 25, 2002 at 1:07 AM / IP Logged

thanks for the tip. i did what you say and it work fine.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 25, 2002 at 9:35 AM / IP Logged

Post your results if this did not help.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

mirroo

Member - Posts: 1

Joined: July 06, 2002

Location: Germany

Posted: July 09, 2002 at 2:16 PM / IP Logged

help Alpine 6 Disc CD Changer 5952z came up with ERROR 2.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 09, 2002 at 3:57 PM / IP Logged

Check to see if the M-bus cable is damaged anywhere. This could cause an error message to come up and if it is in good condition you call 1-800-ALPINE-1 and talk to a tech that will help you out.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine cd changer error 01

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.