2006 tundra, amp wiring?

Does anyone have a wiring diagram for the factory amp two connectors on a 2006 Tundra?  I want to hook up an after market amp and i don't know if buying a wiring harness will work.  Anyone have any ideas?-pj

If you are putting in an after market amp to run what? Speakers or subwoofers? You can get at the wires at the back of the radio and use a high level input on an amp or use a LOC (line out converter), or you can create rca off the back of the radio to the amp low input. It is depending on where you are accessing the wires. You also have to check the turn on wire to see if it puts out 12 volts or less. If it puts out less then 12v+ then you need to add a relay for the after market amp. If running amp to speakers you may want to run new 18 - 16 awg wire into the doors. Battery        RED OR RED / GREEN     (+)     RADIO HARNESS           Accessory     GRAY          (+)     RADIO HARNESS           Ground          BROWN          (-)     RADIO HARNESS           Illumination     GREEN          (+)     RADIO HARNESS           Amp Turn On     BLACK/ RED     (+)     RADIO HARNESS           LF Speaker (+)          PINK           LF Speaker (-)          VIOLET           RF Speaker (+)          GREEN           RF Speaker (-)          BLUE           LR Speaker (+)          BLACK           LR Speaker (-)          YELLOW           RR Speaker (+)          RED           RR Speaker (-)          WHITEThe wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya