|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: remote start wont work, 08 tacoma ( Topic Closed)
|
  |
|
| Author |
|
|
myzohforalliart
Joined: April 04, 2008
Posts: 4 |
| Posted: April 04, 2008 at 12:17 AM - IP Logged |
|
|
I have a 2008 Tacoma that i installed a pretty nice alarm on it, made by directed. I also bout the xk05 transponder. I just cant seem to get it to start. when i hit the remote start, i hear locks and the remote beep and then just doesn't start.
I have the Ungo SR6000 with the directed xk05 transponder which has firmware version:PKT2
Any help will save me some money
thanks
|
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
Chris Luongo
Joined: May 21, 2002
Location:
Massachusetts,
United States
Posts: 3,513 |
| Posted: April 04, 2008 at 8:10 AM - IP Logged |
|
|
| What if the XK05 is disconnected or unplugged, will the truck remote start if you leave a key in the ignition? |
|
| Back to Top |
|
|
|
myzohforalliart
Joined: April 04, 2008
Posts: 4 |
| Posted: April 04, 2008 at 11:51 AM - IP Logged |
|
|
| Im not sure, i have not tried it,
|
|
| Back to Top |
|
|
|
techman93
Joined: October 28, 2006
Location:
Pennsylvania,
United States
Posts: 593 |
| Posted: April 04, 2008 at 10:14 PM - IP Logged |
|
|
Has the bypass has been programmed? Are the data, IMO and IMI wires hooked up properly?
___________________________________________
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya |
|
| Back to Top |
|
|
|
Chris Luongo
Joined: May 21, 2002
Location:
Massachusetts,
United States
Posts: 3,513 |
| Posted: April 05, 2008 at 11:26 AM - IP Logged |
|
|
It's always best to successfully install the remote starter portion first, and then do the transponder bypass later.
When you can, report back if the rest of the system works correctly with a good key in the ignition. |
|
| Back to Top |
|
|
|
myzohforalliart
Joined: April 04, 2008
Posts: 4 |
| Posted: April 07, 2008 at 2:54 AM - IP Logged |
|
|
when i hit the remote start, the lights come on, ans the alarm does something like it wants to start but no cranking.
Some one did this install on my car so i dont know if they did the bypass or not.
They said they connected it up and connected the transponder and it didnt work.
im just trying to back track
thanks for the info.
If my keys are in the ignition nothing happens,
if i get in the car and touch the brake, then everything shuts down just liek how it should..but still there is no remote start.
|
|
| Back to Top |
|
|
|
Mike M2
Joined: June 29, 2005
Location:
United States
Posts: 2,466 |
| Posted: April 07, 2008 at 6:44 AM - IP Logged |
|
|
It sounds like they didn't connect the second starter wire.....
___________________________________________
Mike M2
Tech Manager
CS Dealer Services |
|
| Back to Top |
|
|
|
myzohforalliart
Joined: April 04, 2008
Posts: 4 |
| Posted: April 07, 2008 at 8:07 PM - IP Logged |
|
|
| Thanks, Ill check for that |
|
| Back to Top |
|
|
|
dtk1
Joined: June 21, 2007
Location:
United States
Posts: 179 |
| Posted: April 07, 2008 at 10:21 PM - IP Logged |
|
|
| it sure sound like a 2nd started issue or a bypass issue what you can do is put the key in the ignition but don turn it just insert and leave it now try to activate the remote start if it start then the issue is the immobilizer if it doesn't start then is the second starter |
|
| Back to Top |
|
|
|
techman93
Joined: October 28, 2006
Location:
Pennsylvania,
United States
Posts: 593 |
| Posted: April 07, 2008 at 11:13 PM - IP Logged |
|
|
Definitely sounds like the 2nd start wire is not being powered up when the 1st start wire is. Double check wire connections and run a seperate relay for 2nd starter if it hasn't already been hooked up.
Battery WHITE/BLUE (+) IGNITION SWITCH HARNESS
Ignition 1 BLACK/RED (+) IGNITION SWITCH HARNESS
Ignition 2 BLUE/YELLOW (+) IGNITION SWITCH HARNESS
Accessory 1 WHITE/GREEN (+) IGNITION SWITCH HARNESS
Starter 1 GREEN/BLACK (+) IGNITION SWITCH HARNESS
Starter 2 BLACK/WHITE (+) IGNITION SWITCH HARNESS
Anti-Theft Type UNIVERSAL IMMOBILIZER
Anti-Theft Descript THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER
Key Sense GREEN/BLACK (-) IGNITION SWITCH HARNESS
Tachometer BLACK/WHITE (-) AT ECM MODULE BEHIND GLOVEBOX
Speed Sense VIOLET/WHITE (AC) AT ECM MODULE BEHIND GLOVEBOX
Parking Lights GREEN (+) AT VEHICLE FUSE PANEL
Low Crr. Pk Lights GREEN (-) AT VEHICLE HEADLIGHT SWITCH
Brake Lights BLUE (+) AT SWITCH ABOVE BRAKE PEDAL
ALSO AT VEHICLE FUSEBOX IN 11 PIN PLUG PIN #2
Reverse Lights RED/WHITE (+) IN HARNESS IN DRIVER KICKPANEL
Horn GREEN/RED (-) AT VEHICLE FUSEBOX
18 PIN PLUG - PIN #10
IMO LIGHT GREEN/BLACK
IMI BLUE/WHITE
___________________________________________
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya |
|
| Back to Top |
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
