|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: 2001 Jeep Cherokee Sport ( Topic Closed)
|
  |
|
| Author |
|
|
awd_sr
Joined: June 04, 2002
Location:
United States
Posts: 86 |
| Posted: June 04, 2002 at 8:57 AM - IP Logged |
|
|
| Does anyone have the wiring diagram for a 2001 Jeep Cherokee sport? Were there any changes from 00, and are there any things to look out for? Thanks |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
awd_sr
Joined: June 04, 2002
Location:
United States
Posts: 86 |
| Posted: June 05, 2002 at 3:51 PM - IP Logged |
|
|
| Does anyone know if the 2000 diagram will work for the 2001? I appreciate the help. |
|
| Back to Top |
|
|
|
Velocity Motors
Joined: March 08, 2002
Location:
Manitoba,
Canada
Posts: 12,508 |
| Posted: June 05, 2002 at 10:34 PM - IP Logged |
|
|
No change between the 2000 and the 2001 for ALL Cherokee models.
___________________________________________
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA |
|
| Back to Top |
|
|
|
awd_sr
Joined: June 04, 2002
Location:
United States
Posts: 86 |
| Posted: June 05, 2002 at 10:37 PM - IP Logged |
|
|
thanks again Jeff, again, this site is great. You guys truly are a huge help to all levels of installers, hobbyist and pros. Take care |
|
| Back to Top |
|
|
|
Velocity Motors
Joined: March 08, 2002
Location:
Manitoba,
Canada
Posts: 12,508 |
| Posted: June 05, 2002 at 11:11 PM - IP Logged |
|
|
Not a problem AWD_SR !! Here is the wire color codes for the Cherokee and I posted the Nissan one as well for you in the other post. If you have any problems just post your questions and one of the members will help you out, maybe even me  Remote Starter Wiring Colors and Notes | Function | | | Vehicle Color | Location | Start: | | | YELLOW | IGNITION SWITCH HARNESS | Ignition #1: | | | D BLUE | IGNITION SWITCH HARNESS | Ignition #2: | | | BLACK/ORANGE | IGNITION SWITCH HARNESS | Ignition #3: | | | N/A | | Accessory: | | | BLACK/WHITE | IGNITION SWITCH HARNESS | Brake Light: | | | WHITE/GREEN | AT SWITCH ABOVE BRAKE PEDAL | Tach Signal: | | | GRAY | AT COIL ON PASSENGER SIDE OF ENGINE | Parking Lights: | | | BLACK/YELLOW | AT HEADLIGHT SWITCH | Headlights: | | | LIGHT GREEN | AT HEADLIGHT SWITCH | OEM Alarm Disarm: | | | VIOLET/YELLOW (-) | DRIVER'S KICK PANEL | OEM Alarm Arm: | | | ARMS WHEN DOORS ARE | LOCKED WITH DR. DOOR OPEN | Diesel Glow Plug: | | | | | Clutch Bypass Wire: | | | | | Notes: | | |
Alarm and Keyless Entry Wiring Colors and Notes | Function | | | Vehicle Color | Location | Constant +12 Volts: | | | RED OR PINK/BLACK | IGNITION SWITCH HARNESS | Starter Kill: | | | YELLOW | IGNITION SWITCH HARNESS | Ignition +12 Volts: | | | D BLUE | IGNITION SWITCH HARNESS | Dome Lights/Superv: | | | YELLOW (-) | AT ANY PIN SWITCH | OEM Horn: | | | BLACK/RED (-) | STEERING COLUMN HARNESS | Power Lock: | | | ORANGE/VIOLET (+) | LOCATED IN DRIVER'S KICK PANEL * | Power Unlock: | | | PINK/VIOLET (+) | LOCATED IN DRIVER'S KICK PANEL * | Trunk Release: | | | PINK/BLACK (+) | (LIFTGATE UNLOCK) | Alarm Input Wire: | | | YELLOW (-) | AT ANY PIN SWITCH | Notes: | | * Positive Pulse Door Lock |
___________________________________________
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA |
|
| Back to Top |
|
|
|
awd_sr
Joined: June 04, 2002
Location:
United States
Posts: 86 |
| Posted: June 06, 2002 at 6:12 AM - IP Logged |
|
|
Thanks again Jeff, I tell you, you guys here at this site surely save people lots of time and wads of dough! I'll be sure to post my Q's here as I start 'er up. Take it e-z. Tony |
|
| Back to Top |
|
|
|
awd_sr
Joined: June 04, 2002
Location:
United States
Posts: 86 |
| Posted: June 06, 2002 at 12:15 PM - IP Logged |
|
|
I noticed that in the above wiring list, it says that the Power Lock and Unlock are "positive Pulse door lock", but the list I downloaded for the 2000 says 3 wire negative. Which one of these is true? Also, the 2000 list says "door unlock may require relay; for keyless entry upgrade to an alarm, Arm=Blue, Disarm=Blue/Red, located in overhead console." I'm about to install a Crim Guard 745i3 with built in relays for door lock/unlock, and according to their manual for 3 wire negative systems there is a blue wire from the alarm that goes to the swithc unlock wire, and a green/black wire that goes to the switch lock wire. Does arm mean lock and disarm mean unlock? Or do I hook these to the wires listed in the above list (blue from alarm to pink/violet in car & green/blk from alarm to orange/violet of car) Thanks again |
|
| Back to Top |
|
|
|
awd_sr
Joined: June 04, 2002
Location:
United States
Posts: 86 |
| Posted: June 10, 2002 at 6:11 AM - IP Logged |
|
|
| I wanted to thank you again. I completed the install this weekend, and it took me like 9 hours to get it all in (don't laugh)... I guess the more installs you do, the quicker you get. It was hard for me to solder under the dash because the factory wiring harness' have little to no slack. Then figuring out a place to put all the sensors was tough. Then trying to fit a drill under the dash to for grounding was another thing that slowed me down. But I love the new alarm and all the features. Thanks again Jeff! |
|
| Back to Top |
|
|
|
Velocity Motors
Joined: March 08, 2002
Location:
Manitoba,
Canada
Posts: 12,508 |
| Posted: June 10, 2002 at 5:47 PM - IP Logged |
|
|
Good to hear another install went well. If you have any other questions you know where to post
___________________________________________
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA |
|
| Back to Top |
|
|
|
|
Sorry, you can NOT post a reply.
This topic is closed.
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
