hey all

I need wiring for a 08 Dodge sprinter to install an AVIC Z3 navigation system so mainly the info on speed sensors. and any other tricks anyone might know for the sprinter.

thanks

THIS VEHICLE USES THE CAN DATA SYSTEM FOR ACCESSORY TURN ON

	Battery		RED/BLACK		(+)		RADIO HARNESS
	Accesory		BROWN & BROWN/RED		(DATA)		RADIO HARNESS
	Ground		BROWN		(-)		RADIO HARNESS
	Illumination		BROWN & BROWN/RED		(DATA)		RADIO HARNESS
	Power Antenna		YELLOW/BLACK		(+)		RADIO HARNESS
	LF Speaker (+)		BROWN/VIOLET
	LF Speaker (-)		BROWN/DARK GREEN
	RF Speaker (+)		BROWN/ORANGE
	RF Speaker (-)		BROWN/DARK BLUE
	LR Speaker (+)		BROWN/RED
	LR Speaker (-)		BROWN/WHITE
	RR Speaker (+)		BROWN/PINK
	RR Speaker (-)		BROWN/GRAY
	Steering Cntrls		NO
	Speed Cntrl		YES
	Radio Security		YES

how does the CAN DATA SYSTEM impact the install? I havent heard of this, at least by that name.

Metra Electronics Corp. XSVI-1784-NAV
2007-Up Dodge Sprinter w/Nav outputs

Description

2007-Up Dodge Sprinter w/Nav outputs

Product Specifications

• Provides 12vdc accessory output
• Provides VSS, Reverse, and Parking brake outputs

The XSVI series interface is an inexpensive solution that provides +12-volt accessory power output for select vehicles that data control signals instead of conventional power signals. If the vehicle is equipped with retained accessory power features, the XSVI will keep those features. Also provides outputs for VSS, Reverse, and Parking Brake.