the12volt.com - Free Technical Information for Mobile Electronics Installers, Enthusiasts, and Do-It-Yourselfers since 1999

Relay Diagrams - Quick Reference

Basics • Car Audio • Car Security • Cruise Controls • Diodes • Door Locks • Ohm's Law • Passive Crossovers • Relays • Resistors • Subwoofer Enclosures

Application Guides • Calculators, Charts, Diagrams • Downloads/Manuals • Find Installers • Forums • Glossary • Subwoofer Wiring • Tools • Vehicle Wiring

Mobile Electronics Basics

Glossary of Terms

Tools and Equipment

Car Audio & Mobile Video

Metra Application Guides

Parallel & Series Calcs

Passive Crossovers

Port Length Calculators

Subwoofer Box Calculators

Subwoofer Enclosure Types

Subwoofer Wiring Options

Thiele - Small Parameters

Vehicle Wiring Database

Car Security & Convenience

Alarm Accessories

Basic Connections

Illuminated Entry

Power Door Locks

Starter Interrupts

Vehicle Wiring Database

Cruise Controls

Electrical Connections

Mechanical Connections

VSS and Tach Info

Vehicle Wiring Databse

Forums

Buy & Sell Equipment

Car Audio Hot Topics

Car Security & Convenience

Car Security Hot Topics

Car Security Pictorials

Cellular & Communications

Cruise Controls

Fiberglass & Fabrication

General Discussion

Lights, Neon, LEDs, HIDs

Mobile Video & Navigation

Motorcycle Electronics

Music, Favorite Songs

Rides & Systems Gallery

Vehicle Information

Recent Forum Topics

Forum Help & How To

Forum & Site Notices

General Information

Downloads - Manuals

Find an Installer

Glossary of Terms

Insurance for Car Stereos

Mobile Tech News

The Application Guide

Vehicle Wiring Database

Et Cetera

About the12volt

Hurricane Katrina

TopGearAutosport.com

AutoAnything.com

GPS Vehicle Tracking

the12volt's install bay
Mobile Electronics Forums

Welcome Guest :)

Custom Search

the12volt`s installbay - Mobile Electronics Forums

the12volt's install bay / Car Security and Convenience

Topic: 2008 ford focus, alarm, remote start ( Topic Closed)

Post Reply

Post New Topic

Author

Message

<< Prev Topic | Next Topic >>

sk8manpro3574

Junior Member

Junior Member

Joined: May 29, 2009
Location:
Florida,
United States
Posts: 1

Posted: June 17, 2009 at 7:04 PM - IP Logged

Wiring diagram for a 2008 ford focus 2dr se. for remote start/alarm
___________________________________________
Shawn

Search for other posts by sk8manpro3574

Hi Guest

Not a member?
Register

Already a member?
Sign In

mikvot

Gold

Gold

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006
Location:
Missouri,
United States
Posts: 1,038

Posted: June 17, 2009 at 9:07 PM - IP Logged

Wire/Function

Colour

Location/Description

Polarity

PASSIVE ANTI-THEFT

YES

TRANSPONDER

SEE NOTES

12 VOLTS

Blue/red

Ignition switch harness

+

IGNITION

Brown/yellow

Ignition switch harness

+

ACCESSORY

Violet/green

Ignition switch harness

+

STARTER

Blue/white

Ignition switch harness

+

KEY SENSE

Blue/gray

Ignition switch harness

+

TACH SIGNAL

Yellow/orange

At PCM near battery

AC

LOCK

Yellow/gray

In harness in driver kick panel

-

May also be Light Blue/Light Green (-) in driver's kick panel.

UNLOCK

Violet/brown

In harness in driver kick panel

-

May also be Yellow/Violet (-) in driver's kick panel.

DISARM

Violet/brown

In harness in driver kick panel

-

DRIVER LOCK MOTOR

Blue/green

In harness in driver kick panel

REV POL

DRIVER UNLOCK MOTOR

Gray/brown

In harness in driver kick panel

REV POL

DOMELIGHT / ALL DOORS

Gray/violet

In harness in driver kick panel

+

HOODPIN

Blue/orange

At smart junction box under driver dash

-

TRUNK PIN

Yellow/green

In harness in driver kick panel

-

TRUNK RELEASE

Light Blue

Driver's kick panel

+

Can use OEM remote to test.

BRAKE SWITCH

Violet/white

At switch above brake pedal

+

PARKING LIGHTS

Violet/white

At harness in driver's kick panel

+

HORN

Blue/white

Steering column harness

-

Available Notes

Vehicle Notes

PLEASE NOTE: This vehicle is equipped with an IMMOBILIZER passive anti-theft system. Please refer to the ALARM diagram before any remote start installation.

Additional Notes

Parking lights- Violet/white @ BCM above DKP. This wire should be used to avoid damage to the light switch.

Trunk release- Brown next to lock wires. This wire will not test.

Search for other posts by mikvot

the12volt`s installbay - Mobile Electronics Forums

the12volt's install bay / Car Security and Convenience

Sorry, you can NOT post a reply.
This topic is closed.

Post Reply

Post New Topic

Printable version

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Custom Search

Follow the12volt.com:

Follow the12volt.com on Twitter

Share, print & email this page:

Thursday, May 17, 2012

•

Copyright © 1999-2012 the12volt.com

•

Donate to the12volt.com

•

•

•

Free Sitemap Generator

Basics • Car Audio • Car Security • Cruise Controls • Diodes • Door Locks • Ohm's Law • Passive Crossovers • Relays • Resistors • Subwoofer Enclosures

Application Guides • Calculators, Charts, Diagrams • Downloads/Manuals • Find Installers • Forums • Glossary • Subwoofer Wiring • Tools • Vehicle Wiring

the12volt.com - Free Technical Information for Mobile Electronics Installers, Enthusiasts, and Do-It-Yourselfers since 1999

Donate to the12volt.com

It appears that you are using an older browser or your browser does not support JavaScript, or you have it disabled. This site takes advantage of newer features. High Color or better, and a 6.0 browser or the latest version is required with JavaScript and Style Sheets enabled. Don't miss out!