
|
 |
the12volt's install bay Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
Topic: 2010 kia soul remote start alarm
|
  |
 |
| Author |
|
|
lucasoil4u Joined: May 11, 2009 Location: Minnesota, United States Posts: 57 |
| Posted: May 16, 2011 at 3:46 PM - IP Logged |
|
|
| Look at wiring diagram for what I mean. Need to relay isolate to preventstarter grind on key take over . And will double pulse work for disarming the factory alarm. Look at wiring diagram and let me know . Thanks for help. |
|
| Back to Top |
 |
 |
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
 |
|
howie ll Joined: January 09, 2007 Location: United Kingdom Posts: 9,709 |
| Posted: May 16, 2011 at 4:46 PM - IP Logged |
|
|
Compustar should have double pulse built in. They also give you a diagram for the supplied relay. All in the installation guide, if not as follows:-
86 ignition input/output
85 ground when armed output from Compustar
cut starter lead and key side to 87A
starter side to 30
MY modification,
starter output from Compustar to 87.
1N4004 diode across 85 and 86, band or cathode to 86.
___________________________________ Amateurs assume, don't test and have problems; pros test first.
Read the installation manual, do a search here for your vehicle wiring. |
|
| Back to Top |
 |
 |
|
howie ll Joined: January 09, 2007 Location: United Kingdom Posts: 9,709 |
| Posted: May 16, 2011 at 4:50 PM - IP Logged |
|
|
Sorry I'm getting confused with someone else hi-jacking this post.
Lucasoil4u, read the instructions, the anti grind relay is built in on current DEI (Viper) product.
Cut the starter wire, green to key side and violet to starter side.
If you think you can do this on a 2011 without a by-pass good luck. ___________________________________ Amateurs assume, don't test and have problems; pros test first.
Read the installation manual, do a search here for your vehicle wiring. |
|
| Back to Top |
 |
 |
|
thejetmolina Joined: November 18, 2008 Location: New Jersey, United States Posts: 22 |
| Posted: February 02, 2012 at 8:25 AM - IP Logged |
|
|
does anyone know if the 2012 soul has the same wiring? i know some things are different with the 2012 but could i still go by this? ___________________________________ Beep Beep who got the keys to the Jeep |
|
| Back to Top |
 |
 |
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum
|
|
|
 |
|
|
| |