|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: problems with an xbox 360
|
  |
|
| Author |
|
|
jasonea
Joined: October 07, 2010
Location:
Wisconsin,
United States
Posts: 2 |
| Posted: October 07, 2010 at 12:48 PM - IP Logged |
|
|
We are running the stinger 500/w1000w max power inverter with 8 ga power wire ran right to it. The problem we are having is a line going through the screen (alpine INA-W900). We had it in our shop and when we unplugged it from the power inverter and plugged it into the wall the lines went away. Does somebody make a big enough power filter to run in line with this or is there any other ways of fixing this problem?
I know the 360 runs on 12v so I was thinking maybe its something wrong going from 12v to 120v back down to 12v some kind of interferance. |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
icearrow6
Joined: February 02, 2009
Location:
California,
United States
Posts: 449 |
| Posted: October 07, 2010 at 1:15 PM - IP Logged |
|
|
Problem is not enough juice.
The xbox360 is the most power hungry of the latest generation consoles. I have mine with a 1000W 30 amp inverter, and a second battery just for the console.(you see that huge power brick attached to the power cable? its a hint).
___________________________________
"i can install it myself.......what wires go where?" |
|
| Back to Top |
|
|
|
jasonea
Joined: October 07, 2010
Location:
Wisconsin,
United States
Posts: 2 |
| Posted: October 07, 2010 at 1:18 PM - IP Logged |
|
|
I did a lot of research before buying it they said you need 400w cont. and this ones 500 cont 1000w max.
so you think we need a 1000w cont inverter?? |
|
| Back to Top |
|
|
|
icearrow6
Joined: February 02, 2009
Location:
California,
United States
Posts: 449 |
| Posted: October 07, 2010 at 1:29 PM - IP Logged |
|
|
Back when I put mine in (an older 2nd gen model) the problem i had was the AMPs. you see the console i believe draws close to 30 when in full game cycle ( think modern warefare 2 with 4players).
I read the specs on the new Slim x360 model and the power is only 12.5Amps.
Anyways, check your supply, because if you are supplying enough power, then the problem could be the ac ripple showing on the screen. Try running the tv's main power straight from the battery.
___________________________________
"i can install it myself.......what wires go where?" |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
