ADS is proud to announce the release of weblink 5 including KLON.

KLON is offering a Professional Installer the ability to complete a remote starter install in a Ford vehicle equipped with a 40 bit immobilizer using only one vehicle valid key for programming.

Using an iDatalink ADS-AL CA and the KLON service a professional installer will have the ability to replace a vehicle valid key (using a data interface for remote start) and replace the dealer scantool which would be required to program a new key to the vehicle.

Enjoy!

are you working for idatalinks promotional team?

i thought the 1key solution was already available from idatalink for awhile now if one was lost...a custom firmware was used.

are you saying only one key will need to be used now?

Actually, he works in tech support.

this is for the new Ford system

The custom firmware for a one key solution on older Fords was taking around 2 hours to process and was based on engineering availability. Now with KLON it's done in seconds through 24/7 support servers.

Regards!

You must use this form (  http://www.idatalink.com/user/registration ) to register
and meet their requirements.  Here is the note at the bottom of the form :

Weblink registration is reserved for registered installation retailers and/or installers
only. Access to KLON firmware will be granted upon registration approval by ADS within
one business day via email notification.