|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: 2001 suzuki bandit ( Topic Closed)
|
  |
|
| Author |
|
|
chev104275
Joined: November 26, 2007
Location:
Massachusetts,
United States
Posts: 742 |
| Posted: February 16, 2011 at 9:57 AM - IP Logged |
|
|
I changed all the turn signals to led 1157 bulbs and making the turn signal lights act as running lights. The front works fine as they were wired like that already. But the back if i connect the wire coming from the rear tail light assy for the running lights the directional will stop working and the directional indicator will be lit dim. if i connect just the running light it works or if i connect just the directional it works just not together.
Any ideas on how to fix this ?? thanks Joe
___________________________________
If i Can't Install it I Don't need it Joe |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
i am an idiot
Joined: September 21, 2006
Location:
Louisiana,
United States
Posts: 10,451 |
| Posted: February 18, 2011 at 9:09 PM - IP Logged |
|
|
| Connect the taillight to the dimmer of the 2 elements. Connect the blinker wire to the brighter of the 2 elements. |
|
| Back to Top |
|
|
|
chev104275
Joined: November 26, 2007
Location:
Massachusetts,
United States
Posts: 742 |
| Posted: February 19, 2011 at 5:53 AM - IP Logged |
|
|
Ha ha ha I know that. I think I figured it out. I'm waiting for a new flasher relay to correct the fast flash. If I put a diode in the turn signal wire it stops the feedback from the parking light but without the new relay it stops flashing I'm assuming because on the lack of load on the factory flasher relay
___________________________________
If i Can't Install it I Don't need it Joe |
|
| Back to Top |
|
|
|
chev104275
Joined: November 26, 2007
Location:
Massachusetts,
United States
Posts: 742 |
| Posted: February 23, 2011 at 5:17 PM - IP Logged |
|
|
Allset with the new flasher relay installed it flashes correctly and with a diode inline with the turn signal wire no back feeding from the parking lights
I used a ELFR-1 from customled.com. 2 min install
___________________________________
If i Can't Install it I Don't need it Joe |
|
| Back to Top |
|
|
|
|
Sorry, you can NOT post a reply.
This topic is closed.
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
