Joined: July 21, 2004 Location: Arkansas, United States Posts: 57
Posted: June 08, 2011 at 11:08 PM - IP Logged
Hello everyone, I just installed a Python responder one 4302 with a DEI 1101t bypass (I have the keyless "smart" keys) into my 2006 RX8. Everything went smoothly, but every time I remote started the car the alarm would go off. No biggie, I forgot to hook up the factory disarm wire. The new problem I have is when the RS disarms the factory alarm, it also unlocks the doors, which is obviously bad.
SO, I read on a mazda 6 forum that someone with a 2006 tied the status output of their remote start to their keysense wire, which would disarm the alarm without unlocking the doors. (Status output is negative, keysense is positive, so use a relay.) Does anyone here have experience with the RX8 or other Mazdas to know if that's something I could do? Or if there's another proven method of disarming the crazy thing without unlocking the doors?
Any/all info is greatly appreciated! Thanks!
http://www.mazdas247.com/forum/showthread.php?123726609-Remote-Start-for-MS6 Here's the link to the mazda 6 article ___________________________________ I didn't do it. *nodnod*
Joined: September 23, 2008 Location: Pennsylvania, United States Posts: 506
Posted: June 15, 2011 at 11:54 PM - IP Logged
You could do 2 things. Try the status output through a relay to the keysense (you wont hurt anything). If that doesnt work, use the factory disarm from the python to disarm the alarm and also use the small purple (-) 200mA starter output through a relay with a 1000ohm resistor to the same disarm wire and diode isolate the 2 wires. This will disarm and unlock the doors when the remote start is first activated and then when the engine begins cranking the doors will relock. I do the second option all the time with avital remote starts on alot of Hondas which work basically the same way
Joined: July 21, 2004 Location: Arkansas, United States Posts: 57
Posted: June 16, 2011 at 9:45 AM - IP Logged
Awesome! Would the diode be like I drew it in the picture? Or since it's a negative pulse do I have it backwards? ___________________________________ I didn't do it. *nodnod*
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum
Member List
Search
Register
Login
Topic: rx8 keysense as factory alarm disable?
