the12volt.com - Free Technical Information for Mobile Electronics Installers, Enthusiasts, and Do-It-Yourselfers since 1999

Basics • Car Audio • Car Security • Cruise Controls • Diodes • Door Locks • Ohm's Law • Passive Crossovers • Relays • Resistors • Subwoofer Enclosures

Application Guides • Calculators, Charts, Diagrams • Downloads/Manuals • Find Installers • Forums • Glossary • Subwoofer Wiring • Tools • Vehicle Wiring

Recent Topics

Mobile Electronics Basics

Car Audio & Mobile Video

Introduction

Metra Application Guides

Parallel & Series Calcs

Passive Crossovers

Port Length Calculators

Subwoofer Box Calculators

Subwoofer Enclosure Types

Subwoofer Wiring Options

Thiele - Small Parameters

Miscellaneous

Relay Diagrams

Vehicle Wiring Database

Car Security & Convenience

Vehicle Wiring Database

Cruise Controls

Introduction

Electrical Connections

Mechanical Connections

Servo Settings

VSS and Tach Info

Vehicle Wiring Databse

Forums

Car Security & Convenience

Car Security Hot Topics

Car Security Pictorials

Cellular & Communications

Cruise Controls

Employment

Fiberglass & Fabrication

General Discussion

Lights, Neon, LEDs, HIDs

Miscellaneous

Mobile Video & Navigation

Motorcycle Electronics

Music, Favorite Songs

Relays

Rides & Systems Gallery

General Information

Insurance for Car Stereos

Links

Mobile Tech News

Relay Diagrams

The Application Guide

Vehicle Wiring Database

Et Cetera

the12volt's install bay
Mobile Electronics Forums

Welcome Guest :)

Member List

Custom Search

the12volt's install bay / Motorcycle Electronics

Topic: ducati siemens ecu

Author

Message

<< Prev Topic | Next Topic >>

cbass_ducati

Junior Member

Joined: July 06, 2011
Location:
Reunion
Posts: 2

Posted: July 06, 2011 at 11:45 PM - IP Logged

Hi every body, I'm building back from hash a 696 Ducati equipped with an Siemens ECU (Synerject's M3C M3C Mira Costa Computer Club). Before on Ducati there where Magnetti Marelli IAW59M they where coded with the dash and the keys. But with the new models with siemens ECU you can swap aftermarket ECU from one bike to another (with the correct fuel map...),
the immobilizer is between the dashboard, the keys and antenna in the ignition lock.
but i don't want to spend so much money buying thoses to make my futur track bike start...i'd like to put a motogadget Dash board wich is better and cheaper with a M-Lock to start the bike.

I'm wondering if it is possible to start my bike without the oem dashboard and ignition lock ?

Like there is no immo waiting the ECU to start it is possible ?

or the ECU wait a special digital signal from the dash to make the ignition ok ? (but not the immo fonction)

If i hotwire some wires do you think it'll start the engine with the ECU in place but without any dash and ignition lock ?

i can post the wiring diagram if you need and some pictures of the wires...

it'll be very cool to get some help because i'm far better mechanic than electronics...

Many thanks anyway

Séb

___________________________________
...Ducati...what else ..??

Hi Guest

Not a member?
Register

Already a member?
Sign In

lspker

Standard Member

Joined: November 23, 2003
Location:
Canada
Posts: 485

Posted: July 07, 2011 at 6:52 PM - IP Logged

Not familiar with that set up, but a car unit tends to use a data singnal from imo box and ecu, so just hot wiring won't work. Can you leave the key/ant/imo box wired to ecu and just by pass dash?

If you use an aftermarket ecu, then imo is bypassed.

Can you get the ecu reflashed with imo deactivated?

cbass_ducati

Junior Member

Joined: July 06, 2011
Location:
Reunion
Posts: 2

Posted: July 07, 2011 at 9:01 PM - IP Logged

Thanks for you response, i had confirmation by Chris (Rexxer maker) and Heiko (Motogadget maker) and Tn Moto that there is no longer immo on the siemens ECU and no need to the ECU to be flashed to bust the immo.

i can buy for cheap an ignition lock and keys but not a dash.

Chris told me that i can try start the bike without any dash an d keys but how ? he had confirmation that only the dash and ignition lock are linked for the immo.

the wires of antenna goes directly to the dash if i hotwires thoses cables do you thinks it'll work ?

one other bad things is : there is a atmospheric captor into the dash sending info to the EFI via the CAN line.
it shouldbe too tricky to start the bike without the dash...
___________________________________
...Ducati...what else ..??

the12volt's install bay / Motorcycle Electronics

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum