|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: kawasaki vulcan 1700
|
  |
|
| Author |
|
|
scorpo900
Joined: November 06, 2009
Location:
Florida,
United States
Posts: 18 |
| Posted: September 26, 2011 at 6:25 PM - IP Logged |
|
|
I'm doing an extremely simple alarm install in a Vulcan 1700 Voyager, no starter kill, just sound and (hopefully) visual, lights flashing. I have not been able to find a good trigger wire for the hazard lights, so I can just connect my signal wire out from the alarm. I'm trying at my best to avoid multiple splicing and the use of a relay. There is an orange wire at the tail light connector near the battery, what is that wire for?, it sends a signal with very minimal voltage, when the hazard lights are turned on, Alternative I will try the fog lights, but have not checked the voltage on the fog light switch yet. Any help on where to tap is appreciated.
___________________________________
Always test. When in doubt, read and study. If still in doubt, read some more. If that don't work, don't do it then or your burn everything... a Chef |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
