|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: vehicle injection computer
|
  |
|
| Author |
|
|
naldo
Joined: October 25, 2011
Posts: 17 |
| Posted: October 27, 2011 at 12:40 PM - IP Logged |
|
|
| The wires from the sienna? |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
flobee4
Joined: January 02, 2004
Location:
United States
Posts: 383 |
| Posted: October 27, 2011 at 1:05 PM - IP Logged |
|
|
 Noooo.... the wires from the Pioneer. The red, yellow and black wires are what turns the radio on. If you have no power at the radio then your radio will not turn on, kinda makes sense right? Are you using a harness like I suggested??? Or, did you splice into the factory wiring??? If you spliced into the factory wiring you may have blown a fuse in the car supplying the power to the radio cavity. There are always 2 fuses in a car that runs the radio. You could have blown one or both. But FIRST, check to see if you have power like I said before. |
|
| Back to Top |
|
|
|
naldo
Joined: October 25, 2011
Posts: 17 |
| Posted: October 27, 2011 at 1:28 PM - IP Logged |
|
|
| There is no power on the radio..Im using the harness, where can i find the 2fuse for the radio? |
|
| Back to Top |
|
|
|
flobee4
Joined: January 02, 2004
Location:
United States
Posts: 383 |
| Posted: October 27, 2011 at 8:38 PM - IP Logged |
|
|
which wire doesn't have power? The red one or the yellow one?
One fuse is at the drivers side fusebox - fuse #31
the other fuses are at the fuse box under the hood - fuses #11 & 19
Fuse 19 might be for the amplifier since its a 30 amp fuse. If you don't have a factory amp in your car, the fuse might not be there.
All fuses are listed in the Car's handbook, check it out. Also they "might" be listed on the fuse box lids.
They are labeled RAD No 1, RAD No 2, RAD No 3. RAD No. 3 is for the amplifier. RAD No. 1 and RAD No. 2 are for the radio |
|
| Back to Top |
|
|
|
naldo
Joined: October 25, 2011
Posts: 17 |
| Posted: October 30, 2011 at 10:02 AM - IP Logged |
|
|
| I replaced all the radio fuse but its the same it came on.. |
|
| Back to Top |
|
|
|
naldo
Joined: October 25, 2011
Posts: 17 |
| Posted: October 30, 2011 at 10:04 AM - IP Logged |
|
|
|
| Back to Top |
|
|
|
naldo
Joined: October 25, 2011
Posts: 17 |
| Posted: October 30, 2011 at 4:41 PM - IP Logged |
|
|
| How about the 01 Pontiac Grand Am GT, what color is the speed detction circuit lead? Where is it located? |
|
| Back to Top |
|
|
|
naldo
Joined: October 25, 2011
Posts: 17 |
| Posted: October 30, 2011 at 4:46 PM - IP Logged |
|
|
| Do i need a module for 01 Grand am? I do have module when i installed an amplifier, do i need a different module? Thanks |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
