|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: vss 2009 hybrid highlander
|
  |
|
| Author |
|
|
gilmed
Joined: October 13, 2011
Location:
California,
United States
Posts: 3 |
| Posted: October 26, 2011 at 5:43 PM - IP Logged |
|
|
Looking to connect to a good VSS source without upsetting EMC and generate error messages on display for
a 2009 Toyota Highlander Hybrid without a Navi System.
Any pics and tips will be greatly appreciated! |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
Mike M2
Joined: June 29, 2005
Location:
United States
Posts: 2,466 |
| Posted: October 27, 2011 at 6:25 AM - IP Logged |
|
|
The Vss is on the radio plug, blue, pin 3 in the 20 pin plug(without JBL). If it has JBL it will be under the passenger seat at the amp, light green, pin 11 in the 24 pin plug.
___________________________________
Mike M2
Tech Manager
CS Dealer Services |
|
| Back to Top |
|
|
|
gilmed
Joined: October 13, 2011
Location:
California,
United States
Posts: 3 |
| Posted: October 27, 2011 at 6:01 PM - IP Logged |
|
|
Awsome... I'll post the results next week after testing...
Today I tried the violet wire off the spare connector behind the radio but no pulses... I believe this is the connector for the Navi system.
Thank you Mike_Super_Tech_Manager
|
|
| Back to Top |
|
|
|
gilmed
Joined: October 13, 2011
Location:
California,
United States
Posts: 3 |
| Posted: November 12, 2011 at 4:51 PM - IP Logged |
|
|
It worked... for a 2009 and 2010 as well....
Thanks again Mike. |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
