Hey guys, im new to these forums so if i dont explain something properly or if you have questions about my issue please ask, but i will try my best.
I have a 2011 chevy silverado 2500 work truck. I bought a remote starter from my local NAPA auto parts store. I installed everything, programmed the fob and hit the start button. I tried to start (turned over 3 times) but never did start. I read further in the book and found out i needed a universal bypass module, so i went back and got one from NAPA. The book said the chevy truck had the passlock II type so i am trying to hook it up for that. It is having me hook it up the resistance type way. I hooked up all the wires except for 2 of them and it says they go to a 3 wire harness on the ignition lock cylinder. I looked everywhere and i dont see a 3 wire harness on the ignition lock cylinder, just a 4 wire harness, and it doesnt have the color wires it tells me to look for. Its telling me to look for an orange/black wire and a yellow wire, i cant find either of them. My guess is im supposed to hook to these wires but i dont know which ones. My universal bypass module also came with the loop you wrap around the ignition cylinder and place the key in the module so i dont know if that is an option instead. Either way im just wondering if anyone has any helpful information at all to help me out. Thanks in adnvance. |