|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: toyota corolla 2011
|
  |
|
| Author |
|
|
beam08
Joined: July 25, 2009
Location:
California,
United States
Posts: 42 |
| Posted: January 06, 2012 at 7:09 PM - IP Logged |
|
|
Hi, is anyone has wiring guild for toyota corolla 2011.
Thanks |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
ropuma
Joined: February 16, 2010
Location:
Illinois,
United States
Posts: 93 |
| Posted: January 08, 2012 at 9:14 AM - IP Logged |
|
|
Battery WHITE (+) IGNITION SWITCH HARNESS
Ignition 1 BLACK/YELLOW (+) IGNITION SWITCH HARNESS
Ignition 2 WHITE/BLACK (+) IGNITION SWITCH HARNESS
Accessory 1 YELLOW (+) IGNITION SWITCH HARNESS
Starter 1 BLACK/WHITE (+) IGNITION SWITCH HARNESS
Anti-Theft Type UNIVERSAL IMMOBILIZER
Anti-Theft Descript THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER
Key Sense BLUE/WHITE (-) IGNITION SWITCH HARNESS
Neutral Safety BLUE/WHITE (-) AT DRIVER SIDE FUSEBOX
Tachometer BLUE (AC) AT PCM MODULE UNDER RIGHT CENTER OF DASH
Speed Sense BLUE/WHITE (AC) AT PCM MODULE UNDER RIGHT CENTER OF DASH
Parking Lights RED/BLACK (+) IN HARNESS IN PASSENGER KICKPANEL
Low Crr. Pk Lights RED/YELLOW (-) LIGHT SWITCH HARNESS
Brake Lights WHITE/BLACK (+) AT SWITCH ABOVE BRAKE PEDAL
Reverse Lights GREEN/BLACK (+) AT DRIVER SIDE FUSEBOX
Horn LIGHT GREEN/BLUE (-) AT PASSENGER FUSEBOX
Rear Defrost BROWN/YELLOW
Note: makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation.
|
|
| Back to Top |
|
|
|
beam08
Joined: July 25, 2009
Location:
California,
United States
Posts: 42 |
| Posted: January 11, 2012 at 7:12 PM - IP Logged |
|
|
| Thanks also can you give the color for power lock unlock. |
|
| Back to Top |
|
|
|
kreg357
Joined: January 30, 2009
Location:
New York,
United States
Posts: 2,661 |
| Posted: January 11, 2012 at 9:18 PM - IP Logged |
|
|
Depends on where it was manufactured. Here is info from DEI :
Power Lock purple (CAN made); blue (JPN made) - driver kick, white 18 pin plug, pin 16
Power Unlock beige (CAN made); yellow (JPN made) - driver kick, white 18 pin plug, pin 15
___________________________________
Soldering is fun! |
|
| Back to Top |
|
|
|
beam08
Joined: July 25, 2009
Location:
California,
United States
Posts: 42 |
| Posted: January 12, 2012 at 6:55 PM - IP Logged |
|
|
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
