|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
|
|
| Author |
|
|
i am an idiot
Joined: September 21, 2006
Location:
Louisiana,
United States
Posts: 10,454 |
| Posted: January 14, 2012 at 8:41 PM - IP Logged |
|
|
| Yes a 1n4001 will work fine. Any thing between and including 4001 and 4007. |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
xchrisx
Joined: August 19, 2008
Location:
Pennsylvania,
United States
Posts: 199 |
| Posted: January 14, 2012 at 8:56 PM - IP Logged |
|
|
Thank you!
___________________________________ |
|
| Back to Top |
|
|
|
xchrisx
Joined: August 19, 2008
Location:
Pennsylvania,
United States
Posts: 199 |
| Posted: January 14, 2012 at 9:01 PM - IP Logged |
|
|
I also have another question for the same car, its a 96 eclipse. I did a taillight conversion which doesn't require all the taillight bulbs, I have heard you can stick a resistor in the bulb socket to prevent the rapid light flash that a bulb is out. Is this true? If so, what resistor would I need per side? Thanks.
___________________________________ |
|
| Back to Top |
|
|
|
Ween
Joined: August 01, 2004
Location:
Illinois,
United States
Posts: 746 |
| Posted: January 14, 2012 at 9:36 PM - IP Logged |
|
|
| 6 ohm 50 watt. you could go slightly less wattage (35?) if the signals and hazards are used infrequently. mounting the resistors to metal..aluminum? for a heat sink wouldn't hurt either. if the flasher is a two wire type, you could also get a flasher that isn't load dependent, may require an additional ground wire. |
|
| Back to Top |
|
|
|
xchrisx
Joined: August 19, 2008
Location:
Pennsylvania,
United States
Posts: 199 |
| Posted: January 15, 2012 at 9:56 AM - IP Logged |
|
|
Okay, thanks for the help and I just ordered the diodes online from HongKong... $0.99 for 25 pieces but it takes like a month to get here. Good thing I am not in a hurry. Going to start the fiberglassing of everything.
___________________________________ |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
Topic: air ride pop
